|
Please note that this page does not hosts or makes available any of the listed filenames. You
cannot download any of those files from here.
|
| [TGx]Downloaded from torrentgalaxy.to .txt |
585B |
| 0 |
20B |
| 001 About MCU Development board_en.srt |
4.65KB |
| 001 About MCU Development board.mp4 |
28.61MB |
| 001 About the instructor.html |
694B |
| 001 Address of peripheral registers_en.srt |
2.75KB |
| 001 Address of peripheral registers.mp4 |
7.46MB |
| 001 Alternate functionality settings of a GPIO pin with example Part 1_en.srt |
5.72KB |
| 001 Alternate functionality settings of a GPIO pin with example Part 1.mp4 |
17.59MB |
| 001 Assignment I2C interrupt APIs implementation_en.srt |
2.82KB |
| 001 Assignment I2C interrupt APIs implementation.mp4 |
18.91MB |
| 001 Bare-metal-embedded.url |
96B |
| 001 Board-details.url |
84B |
| 001 BONUS LECTURE.html |
4.29KB |
| 001 Common Problems in I2C and Debugging Tips_en.srt |
3.97KB |
| 001 Common Problems in I2C and Debugging Tips.mp4 |
11.21MB |
| 001 Common problems in SPI and Debugging Tips_en.srt |
6.66KB |
| 001 Common problems in SPI and Debugging Tips.mp4 |
19.07MB |
| 001 Creating GPIO driver header and source file_en.srt |
2.07KB |
| 001 Creating GPIO driver header and source file.mp4 |
5.75MB |
| 001 Creating Hello-World project_en.srt |
12.62KB |
| 001 Creating Hello-World project.mp4 |
34.37MB |
| 001 Debugging options_en.srt |
6.60KB |
| 001 Debugging options.mp4 |
16.62MB |
| 001 Downloading STM32CUBEIDE_en.srt |
2.06KB |
| 001 Downloading STM32CUBEIDE.mp4 |
12.27MB |
| 001 DS1307.pdf |
215.44KB |
| 001 Enabling and disabling GPIO peripheral clock_en.srt |
1.80KB |
| 001 Enabling and disabling GPIO peripheral clock.mp4 |
8.98MB |
| 001 Example of master writing to slave_en.srt |
4.31KB |
| 001 Example of master writing to slave.mp4 |
9.94MB |
| 001 Exercise Communicating with Arduino slave_en.srt |
13.90KB |
| 001 Exercise Communicating with Arduino slave.mp4 |
102.95MB |
| 001 Exercise External button interrupt implementation_en.srt |
26.01KB |
| 001 Exercise External button interrupt implementation.mp4 |
205.20MB |
| 001 Exercise I2C slave programming_en.srt |
3.46KB |
| 001 Exercise I2C slave programming.mp4 |
8.14MB |
| 001 Exercise Introduction_en.srt |
11.36KB |
| 001 Exercise Introduction.mp4 |
69.24MB |
| 001 Exercise LED toggling with PUSH PULL configuration_en.srt |
13.27KB |
| 001 Exercise LED toggling with PUSH PULL configuration.mp4 |
63.79MB |
| 001 Exercise Reading data from the I2C slave_en.srt |
7.61KB |
| 001 Exercise Reading data from the I2C slave.mp4 |
16.46MB |
| 001 Exercise SPI command and response based communication_en.srt |
9.85KB |
| 001 Exercise SPI command and response based communication.mp4 |
32.38MB |
| 001 Exercise Testing I2C interrupt APIs part 1_en.srt |
21.45KB |
| 001 Exercise Testing I2C interrupt APIs part 1.mp4 |
197.57MB |
| 001 Exercise to test SPI Send Data API_en.srt |
3.04KB |
| 001 Exercise to test SPI Send Data API.mp4 |
5.44MB |
| 001 Exercise USART send data to arduino_en.srt |
19.95KB |
| 001 Exercise USART send data to arduino.mp4 |
132.90MB |
| 001 Exploring UART functional block_en.srt |
2.50KB |
| 001 Exploring UART functional block.mp4 |
11.94MB |
| 001 GPIO driver development overview_en.srt |
4.97KB |
| 001 GPIO driver development overview.mp4 |
10.65MB |
| 001 GPIO output speed register and its applicability_en.srt |
6.72KB |
| 001 GPIO output speed register and its applicability.mp4 |
31.23MB |
| 001 GPIO pin and GPIO port_en.srt |
1.93KB |
| 001 GPIO pin and GPIO port.mp4 |
5.80MB |
| 001 GPIO pin Interrupt configuration coding Part 1_en.srt |
7.10KB |
| 001 GPIO pin Interrupt configuration coding Part 1.mp4 |
41.98MB |
| 001 GPIO programming structure_en.srt |
2.39KB |
| 001 GPIO programming structure.mp4 |
15.22MB |
| 001 Hardware-and-software-used-in-MCU1.pdf |
245.73KB |
| 001 HardwareSoftware Requirements.html |
177B |
| 001 HD44780.pdf |
322.07KB |
| 001 I2C driver API requirements_en.srt |
7.13KB |
| 001 I2C driver API requirements.mp4 |
28.59MB |
| 001 I2C-EV-IRQHandling.c |
1.07KB |
| 001 I2C functional block diagram_en.srt |
4.72KB |
| 001 I2C functional block diagram.mp4 |
10.44MB |
| 001 I2C introduction and differences with SPI_en.srt |
13.34KB |
| 001 I2C introduction and differences with SPI.mp4 |
50.96MB |
| 001 I2C IRQ and interrupt discussion_en.srt |
6.22KB |
| 001 I2C IRQ and interrupt discussion.mp4 |
17.92MB |
| 001 I2C IRQ handler implementation Part 1_en.srt |
9.02KB |
| 001 I2C IRQ handler implementation Part 1.mp4 |
84.04MB |
| 001 I2C-MasterReceiveDataIT.c |
1.06KB |
| 001 I2C-MasterSendDataIT.c |
1.03KB |
| 001 I2C Protocol explanation_en.srt |
5.82KB |
| 001 I2C Protocol explanation.mp4 |
58.42MB |
| 001 I2C pull up resistance , rise time and bus capacitance discussion_en.srt |
23.04KB |
| 001 I2C pull up resistance , rise time and bus capacitance discussion.mp4 |
136.41MB |
| 001 I2C serial clock settings with explanation_en.srt |
11.66KB |
| 001 I2C serial clock settings with explanation.mp4 |
76.84MB |
| 001 I2C slave programming discussion_en.srt |
6.89KB |
| 001 I2C slave programming discussion.mp4 |
34.25MB |
| 001 I2C standard and fast mode_en.srt |
4.79KB |
| 001 I2C standard and fast mode.mp4 |
11.52MB |
| 001 I2C transfer sequence diagram for master receiving data_en.srt |
15.56KB |
| 001 I2C transfer sequence diagram for master receiving data.mp4 |
35.65MB |
| 001 I2C transfer sequence diagram for master sending data_en.srt |
13.57KB |
| 001 I2C transfer sequence diagram for master sending data.mp4 |
72.22MB |
| 001 IDE.url |
81B |
| 001 Implementation of GPIO input port read and input pin read APIs_en.srt |
4.65KB |
| 001 Implementation of GPIO input port read and input pin read APIs.mp4 |
9.84MB |
| 001 Implementation of GPIO peripheral clock control API_en.srt |
3.18KB |
| 001 Implementation of GPIO peripheral clock control API.mp4 |
5.82MB |
| 001 Implementation of I2C init API Part 1_en.srt |
14.51KB |
| 001 Implementation of I2C init API Part 1.mp4 |
89.23MB |
| 001 Implementation of SPI data receive API Part 1_en.srt |
2.55KB |
| 001 Implementation of SPI data receive API Part 1.mp4 |
6.36MB |
| 001 Implementation of SPI peripheral clock control API_en.srt |
6.37KB |
| 001 Implementation of SPI peripheral clock control API.mp4 |
19.69MB |
| 001 Implementation of SPI send data API Part 1_en.srt |
10.40KB |
| 001 Implementation of SPI send data API Part 1.mp4 |
28.89MB |
| 001 Importance of Volatile Keyword Part-1_en.srt |
13.19KB |
| 001 Importance of Volatile Keyword Part-1.mp4 |
68.15MB |
| 001 Introduction to SPI Bus_en.srt |
8.04KB |
| 001 Introduction to SPI Bus.mp4 |
17.44MB |
| 001 Intro UART vs USART_en.srt |
2.86KB |
| 001 Intro UART vs USART.mp4 |
8.44MB |
| 001 main.c |
1.98KB |
| 001 MCU Bus Interfaces Explanation Part 1 I-CodeD-CodeS-Bus_en.srt |
14.52KB |
| 001 MCU Bus Interfaces Explanation Part 1 I-CodeD-CodeS-Bus.mp4 |
104.90MB |
| 001 NSS settings in STM32 master and slave modes_en.srt |
3.74KB |
| 001 NSS settings in STM32 master and slave modes.mp4 |
7.21MB |
| 001 Real time clock on LCD_en.srt |
20.00KB |
| 001 Real time clock on LCD.mp4 |
148.74MB |
| 001 RTC-and-LCD-interfacing.pdf |
254.19KB |
| 001 SPI API requirements and configuration items_en.srt |
10.15KB |
| 001 SPI API requirements and configuration items.mp4 |
23.79MB |
| 001 SPI bus configuration discussion full duplex, half duplex and simplex_en.srt |
7.45KB |
| 001 SPI bus configuration discussion full duplex, half duplex and simplex.mp4 |
14.21MB |
| 001 SPI CPOL and CPHA discussion_en.srt |
13.29KB |
| 001 SPI CPOL and CPHA discussion.mp4 |
38.19MB |
| 001 SPI Handling of interrupts_en.srt |
5.00KB |
| 001 SPI Handling of interrupts.mp4 |
29.95MB |
| 001 SPI interrupt mode API implementation and changes to handle structure_en.srt |
5.89KB |
| 001 SPI interrupt mode API implementation and changes to handle structure.mp4 |
20.05MB |
| 001 SPI peripheral interrupting the processor_en.srt |
7.88KB |
| 001 SPI peripheral interrupting the processor.mp4 |
50.34MB |
| 001 SPI peripherals of your Microcontroller_en.srt |
1.78KB |
| 001 SPI peripherals of your Microcontroller.mp4 |
3.34MB |
| 001 SPI user configuration options writing and register bit definition macros_en.srt |
23.86KB |
| 001 SPI user configuration options writing and register bit definition macros.mp4 |
124.24MB |
| 001 STM32 Pin specifications_en.srt |
15.12KB |
| 001 STM32 Pin specifications.mp4 |
87.23MB |
| 001 UART Transmitter_en.srt |
2.89KB |
| 001 UART Transmitter.mp4 |
9.84MB |
| 001 Understanding MCU Clocking SystemPart1_en.srt |
6.56KB |
| 001 Understanding MCU Clocking SystemPart1.mp4 |
29.00MB |
| 001 Understanding MCU clock sources and HSE_en.srt |
15.75KB |
| 001 Understanding MCU clock sources and HSE.mp4 |
89.10MB |
| 001 Understanding MCU interrupt Design , NVIC, Interrupt handling Part 1_en.srt |
10.89KB |
| 001 Understanding MCU interrupt Design , NVIC, Interrupt handling Part 1.mp4 |
92.18MB |
| 001 Understanding MCU Vector Table_en.srt |
30.86KB |
| 001 Understanding MCU Vector Table.mp4 |
150.54MB |
| 001 Understanding Memory Map of the MCU Part 1_en.srt |
5.19KB |
| 001 Understanding Memory Map of the MCU Part 1.mp4 |
26.77MB |
| 001 USART driver development confiugrable items_en.srt |
5.79KB |
| 001 USART driver development confiugrable items.mp4 |
18.91MB |
| 001 USART interrupt discussion_en.srt |
3.62KB |
| 001 USART interrupt discussion.mp4 |
7.22MB |
| 001 USART oversampling_en.srt |
7.92KB |
| 001 USART oversampling.mp4 |
51.40MB |
| 001 Writing base address C macros for MCU's embedded memories Part 1_en.srt |
4.35KB |
| 001 Writing base address C macros for MCU's embedded memories Part 1.mp4 |
15.65MB |
| 001 Writing peripheral clock enable and disable C Macros_en.srt |
9.81KB |
| 001 Writing peripheral clock enable and disable C Macros.mp4 |
57.42MB |
| 001 Writing user configurable macros_en.srt |
9.33KB |
| 001 Writing user configurable macros.mp4 |
50.59MB |
| 002 Alternate functionality settings of a GPIO pin with example Part 1_en.srt |
7.32KB |
| 002 Alternate functionality settings of a GPIO pin with example Part 1.mp4 |
34.14MB |
| 002 Assignment I2C master receive data API implementation_en.srt |
2.13KB |
| 002 Assignment I2C master receive data API implementation.mp4 |
7.06MB |
| 002 Clock Stretching_en.srt |
3.38KB |
| 002 Clock Stretching.mp4 |
9.56MB |
| 002 communicating with PC over UART_en.srt |
4.07KB |
| 002 communicating with PC over UART.mp4 |
9.91MB |
| 002 Defining GPIO handle and configuration structure_en.srt |
7.07KB |
| 002 Defining GPIO handle and configuration structure.mp4 |
15.27MB |
| 002 DS1307 RTC registers_en.srt |
18.57KB |
| 002 DS1307 RTC registers.mp4 |
162.29MB |
| 002 Exercise_en.srt |
4.22KB |
| 002 Exercise.mp4 |
27.06MB |
| 002 Exercise Coding Part 1_en.srt |
16.61KB |
| 002 Exercise Coding Part 1_en.srt |
12.97KB |
| 002 Exercise Coding Part 1_en.srt |
11.88KB |
| 002 Exercise Coding Part 1_en.srt |
7.92KB |
| 002 Exercise Coding Part 1_en.srt |
6.36KB |
| 002 Exercise Coding Part 1.mp4 |
146.05MB |
| 002 Exercise Coding Part 1.mp4 |
107.12MB |
| 002 Exercise Coding Part 1.mp4 |
50.83MB |
| 002 Exercise Coding Part 1.mp4 |
47.13MB |
| 002 Exercise Coding Part 1.mp4 |
31.78MB |
| 002 Exercise Debugging the application Part 1_en.srt |
10.72KB |
| 002 Exercise Debugging the application Part 1.mp4 |
74.25MB |
| 002 Exercise LED toggling with OPEN DRAIN configuration_en.srt |
6.76KB |
| 002 Exercise LED toggling with OPEN DRAIN configuration.mp4 |
33.89MB |
| 002 Exercise Testing I2C interrupt APIs part 2_en.srt |
2.80KB |
| 002 Exercise Testing I2C interrupt APIs part 2.mp4 |
10.13MB |
| 002 Exploring GPIO PORT and pins of STM32F4xx Discovery board_en.srt |
774B |
| 002 Exploring GPIO PORT and pins of STM32F4xx Discovery board.mp4 |
2.58MB |
| 002 Finding out microcontroller pins to communicate over SPI2_en.srt |
5.00KB |
| 002 Finding out microcontroller pins to communicate over SPI2.mp4 |
24.78MB |
| 002 GPIO behind the scene_en.srt |
3.02KB |
| 002 GPIO behind the scene.mp4 |
7.55MB |
| 002 GPIO pin Interrupt configuration coding Part 2_en.srt |
6.52KB |
| 002 GPIO pin Interrupt configuration coding Part 2.mp4 |
22.52MB |
| 002 GPIO Pull up and Pull down register_en.srt |
1.14KB |
| 002 GPIO Pull up and Pull down register.mp4 |
5.68MB |
| 002 HSI and RCC registers_en.srt |
15.17KB |
| 002 HSI and RCC registers.mp4 |
82.84MB |
| 002 I2C errors and importance of BUSY flag_en.srt |
10.29KB |
| 002 I2C errors and importance of BUSY flag.mp4 |
39.00MB |
| 002 I2C handle and configuration structure_en.srt |
756B |
| 002 I2C handle and configuration structure.mp4 |
1.34MB |
| 002 I2C IRQ handler implementation Part 2_en.srt |
4.61KB |
| 002 I2C IRQ handler implementation Part 2.mp4 |
23.82MB |
| 002 I2C rise time calculation_en.srt |
5.16KB |
| 002 I2C rise time calculation.mp4 |
18.50MB |
| 002 I2C SDA and SCL signals_en.srt |
3.86KB |
| 002 I2C SDA and SCL signals.mp4 |
22.51MB |
| 002 I2C START and STOP conditions_en.srt |
11.04KB |
| 002 I2C START and STOP conditions.mp4 |
85.80MB |
| 002 I2C transfer sequence diagram for slave transmitter_en.srt |
8.45KB |
| 002 I2C transfer sequence diagram for slave transmitter.mp4 |
30.86MB |
| 002 Implementation of GPIO init API_en.srt |
8.26KB |
| 002 Implementation of GPIO init API.mp4 |
40.57MB |
| 002 Implementation of GPIO output port write and output pin write APIs_en.srt |
2.99KB |
| 002 Implementation of GPIO output port write and output pin write APIs.mp4 |
12.16MB |
| 002 Implementation of I2C init API Part 2_en.srt |
6.46KB |
| 002 Implementation of I2C init API Part 2.mp4 |
44.32MB |
| 002 Implementation of I2C interrupt based APIs_en.srt |
2.83KB |
| 002 Implementation of I2C interrupt based APIs.mp4 |
10.09MB |
| 002 Implementation of I2C master sending data API Part 1_en.srt |
8.88KB |
| 002 Implementation of I2C master sending data API Part 1.mp4 |
18.54MB |
| 002 Implementation of SPI data receive API Part 2_en.srt |
2.37KB |
| 002 Implementation of SPI data receive API Part 2.mp4 |
7.65MB |
| 002 Implementation of SPI init API Part 1_en.srt |
4.48KB |
| 002 Implementation of SPI init API Part 1.mp4 |
20.86MB |
| 002 Implementation of SPI send data API Part 2_en.srt |
6.08KB |
| 002 Implementation of SPI send data API Part 2.mp4 |
16.49MB |
| 002 Importance of Volatile Keyword-Part 2_en.srt |
9.95KB |
| 002 Importance of Volatile Keyword-Part 2.mp4 |
21.89MB |
| 002 Important Note.html |
1.23KB |
| 002 Installation-Windows_en.srt |
962B |
| 002 Installation-Windows.mp4 |
1.82MB |
| 002 MCU Bus Interfaces Explanation Part 2 AHBAPB1APB2_en.srt |
9.09KB |
| 002 MCU Bus Interfaces Explanation Part 2 AHBAPB1APB2.mp4 |
83.26MB |
| 002 MCU Specific header file and its contents_en.srt |
3.19KB |
| 002 MCU Specific header file and its contents.mp4 |
7.21MB |
| 002 Pin current characteristics_en.srt |
13.27KB |
| 002 Pin current characteristics.mp4 |
36.25MB |
| 002 Project include settings and build_en.srt |
3.93KB |
| 002 Project include settings and build.mp4 |
12.86MB |
| 002 Single stepping_en.srt |
14.72KB |
| 002 Single stepping.mp4 |
39.90MB |
| 002 SPI comparison with other protocols_en.srt |
5.02KB |
| 002 SPI comparison with other protocols.mp4 |
15.73MB |
| 002 SPI CPOL and CPHA waveform example_en.srt |
8.57KB |
| 002 SPI CPOL and CPHA waveform example.mp4 |
26.95MB |
| 002 SPI functional block diagram explanation_en.srt |
9.32KB |
| 002 SPI functional block diagram explanation.mp4 |
19.75MB |
| 002 SPI IRQ handler implementation Part 1_en.srt |
8.77KB |
| 002 SPI IRQ handler implementation Part 1.mp4 |
28.83MB |
| 002 SPI send data with interrupt API implementation_en.srt |
5.04KB |
| 002 SPI send data with interrupt API implementation.mp4 |
42.46MB |
| 002 SPI Serial clock frequency_en.srt |
6.11KB |
| 002 SPI Serial clock frequency.mp4 |
12.36MB |
| 002 STM32 SPI hardware and software slave managements_en.srt |
9.17KB |
| 002 STM32 SPI hardware and software slave managements.mp4 |
14.09MB |
| 002 Structuring peripheral registers_en.srt |
16.83KB |
| 002 Structuring peripheral registers.mp4 |
96.68MB |
| 002 SWV working principle_en.srt |
10.42KB |
| 002 SWV working principle.mp4 |
21.05MB |
| 002 UART peripheral clock_en.srt |
1.67KB |
| 002 UART peripheral clock.mp4 |
7.79MB |
| 002 Uart Receiver_en.srt |
4.14KB |
| 002 Uart Receiver.mp4 |
12.16MB |
| 002 Understanding MCU interrupt Design , NVIC, Interrupt handling Part 2_en.srt |
8.09KB |
| 002 Understanding MCU interrupt Design , NVIC, Interrupt handling Part 2.mp4 |
35.84MB |
| 002 Understanding Memory Map of the MCU Part 2_en.srt |
3.65KB |
| 002 Understanding Memory Map of the MCU Part 2.mp4 |
19.38MB |
| 002 Understanding repeated START condition_en.srt |
5.96KB |
| 002 Understanding repeated START condition.mp4 |
20.69MB |
| 002 Understanding UART pins_en.srt |
2.10KB |
| 002 Understanding UART pins.mp4 |
6.17MB |
| 002 updating MCU specific header file with SPI related details_en.srt |
2.61KB |
| 002 updating MCU specific header file with SPI related details.mp4 |
8.44MB |
| 002 USART-API-prototype.h |
3.33KB |
| 002 USART Baud rate calculation Part-2_en.srt |
9.46KB |
| 002 USART Baud rate calculation Part-2.mp4 |
22.41MB |
| 002 USART driver APIs prototypes_en.srt |
2.34KB |
| 002 USART driver APIs prototypes.mp4 |
10.90MB |
| 002 volatile-experiment-Eclipse.zip |
12.26KB |
| 002 volatile-experiment-Keil.zip |
347.71KB |
| 002 Writing base address C macros for MCU's embedded memories Part 2_en.srt |
2.87KB |
| 002 Writing base address C macros for MCU's embedded memories Part 2.mp4 |
8.06MB |
| 003 Configuration options and USART registers_en.srt |
11.94KB |
| 003 Configuration options and USART registers.mp4 |
100.02MB |
| 003 Defining base addresses of different bus domains_en.srt |
7.30KB |
| 003 Defining base addresses of different bus domains.mp4 |
35.84MB |
| 003 Disassembly and Register windows_en.srt |
5.47KB |
| 003 Disassembly and Register windows.mp4 |
15.25MB |
| 003 Driver API requirements and adding API prototypes_en.srt |
7.51KB |
| 003 Driver API requirements and adding API prototypes.mp4 |
20.64MB |
| 003 Exercise Code implementation Part 1_en.srt |
6.30KB |
| 003 Exercise Code implementation Part 1.mp4 |
11.67MB |
| 003 Exercise Coding Part 2_en.srt |
15.88KB |
| 003 Exercise Coding Part 2_en.srt |
11.84KB |
| 003 Exercise Coding Part 2_en.srt |
4.59KB |
| 003 Exercise Coding Part 2_en.srt |
3.73KB |
| 003 Exercise Coding Part 2.mp4 |
98.83MB |
| 003 Exercise Coding Part 2.mp4 |
79.54MB |
| 003 Exercise Coding Part 2.mp4 |
17.37MB |
| 003 Exercise Coding Part 2.mp4 |
13.32MB |
| 003 Exercise Debugging the application Part 2_en.srt |
4.50KB |
| 003 Exercise Debugging the application Part 2.mp4 |
20.42MB |
| 003 Exercise Handling on board LED and Button_en.srt |
12.54KB |
| 003 Exercise Handling on board LED and Button.mp4 |
102.46MB |
| 003 Exercise Testing_en.srt |
3.09KB |
| 003 Exercise Testing.mp4 |
10.77MB |
| 003 GPIO input data register_en.srt |
1.40KB |
| 003 GPIO input data register.mp4 |
2.63MB |
| 003 GPIO input mode with high impedance state_en.srt |
1.26KB |
| 003 GPIO input mode with high impedance state.mp4 |
2.63MB |
| 003 GPIO Mode register(used to set mode for a pin)_en.srt |
6.93KB |
| 003 GPIO Mode register(used to set mode for a pin).mp4 |
35.08MB |
| 003 GPIO pin Interrupt configuration coding Part 3_en.srt |
1.24KB |
| 003 GPIO pin Interrupt configuration coding Part 3.mp4 |
4.63MB |
| 003 I2C ACK and NACK_en.srt |
3.21KB |
| 003 I2C ACK and NACK.mp4 |
11.59MB |
| 003 I2C handle structure modification_en.srt |
2.87KB |
| 003 I2C handle structure modification.mp4 |
7.55MB |
| 003 I2C IRQ handler implementation Part 3_en.srt |
8.80KB |
| 003 I2C IRQ handler implementation Part 3.mp4 |
62.53MB |
| 003 I2C slave support in driver_en.srt |
5.37KB |
| 003 I2C slave support in driver.mp4 |
63.18MB |
| 003 I2C user configurable macros_en.srt |
6.96KB |
| 003 I2C user configurable macros.mp4 |
45.28MB |
| 003 Implementation of GPIO init API contd_en.srt |
3.19KB |
| 003 Implementation of GPIO init API contd.mp4 |
7.97MB |
| 003 Implementation of GPIO pin toggle API_en.srt |
1.42KB |
| 003 Implementation of GPIO pin toggle API.mp4 |
3.86MB |
| 003 Implementation of I2C init API Part 3_en.srt |
10.99KB |
| 003 Implementation of I2C init API Part 3.mp4 |
70.89MB |
| 003 Implementation of I2C master receive data API Part 1_en.srt |
9.95KB |
| 003 Implementation of I2C master receive data API Part 1.mp4 |
80.50MB |
| 003 Implementation of I2C master sending data API Part 2_en.srt |
3.15KB |
| 003 Implementation of I2C master sending data API Part 2.mp4 |
18.15MB |
| 003 Implementation of SPI init API Part 2_en.srt |
5.85KB |
| 003 Implementation of SPI init API Part 2.mp4 |
28.83MB |
| 003 Implementation of SPI send data API Part 3_en.srt |
7.97KB |
| 003 Implementation of SPI send data API Part 3.mp4 |
19.46MB |
| 003 Importance of SPI slave select pin_en.srt |
3.34KB |
| 003 Importance of SPI slave select pin.mp4 |
6.27MB |
| 003 Installation-Ubuntu_en.srt |
2.77KB |
| 003 Installation-Ubuntu.mp4 |
6.24MB |
| 003 ITM-code.url |
114B |
| 003 Logic levels_en.srt |
16.78KB |
| 003 Logic levels.mp4 |
96.87MB |
| 003 main.c |
901B |
| 003 MCU Bus Interfaces Explanation Part 3 QA session_en.srt |
13.14KB |
| 003 MCU Bus Interfaces Explanation Part 3 QA session.mp4 |
124.65MB |
| 003 New project creation and creating MCU specific headerfile_en.srt |
4.88KB |
| 003 New project creation and creating MCU specific headerfile.mp4 |
14.54MB |
| 003 Peripheral clock configuration_en.srt |
16.82KB |
| 003 Peripheral clock configuration.mp4 |
88.08MB |
| 003 Peripheral definition macros_en.srt |
5.10KB |
| 003 Peripheral definition macros.mp4 |
22.72MB |
| 003 Request for Review.html |
528B |
| 003 RTC code implementation_en.srt |
20.27KB |
| 003 RTC code implementation.mp4 |
165.32MB |
| 003 SPI adding API prototypes to driver header file_en.srt |
7.52KB |
| 003 SPI adding API prototypes to driver header file.mp4 |
37.50MB |
| 003 SPI IRQ handler implementation Part 2_en.srt |
10.16KB |
| 003 SPI IRQ handler implementation Part 2.mp4 |
75.50MB |
| 003 SPI receive data with interrupt implementation_en.srt |
2.00KB |
| 003 SPI receive data with interrupt implementation.mp4 |
6.22MB |
| 003 Testing Hello-World through SWV_en.srt |
7.08KB |
| 003 Testing Hello-World through SWV.mp4 |
44.54MB |
| 003 UART frame formats_en.srt |
1.57KB |
| 003 UART frame formats.mp4 |
10.29MB |
| 003 Understanding MCU interrupt Design , NVIC, Interrupt handling Part 3_en.srt |
16.37KB |
| 003 Understanding MCU interrupt Design , NVIC, Interrupt handling Part 3.mp4 |
72.11MB |
| 003 Understanding Memory Map of the MCU Part 3_en.srt |
9.11KB |
| 003 Understanding Memory Map of the MCU Part 3.mp4 |
83.16MB |
| 003 USART Baud rate calculation Part-2_en.srt |
5.33KB |
| 003 USART Baud rate calculation Part-2.mp4 |
10.97MB |
| 003 USART IRQ handler implementation Assignment.html |
202B |
| 003 USART-IRQHandling.c |
9.14KB |
| 003 What is this course all about_en.srt |
5.66KB |
| 003 What is this course all about.mp4 |
19.23MB |
| 004 Baud Rate_en.srt |
2.27KB |
| 004 Baud Rate.mp4 |
5.23MB |
| 004 Breakpoints_en.srt |
8.67KB |
| 004 Breakpoints.mp4 |
47.59MB |
| 004 Configuring Alternate function registers_en.srt |
10.20KB |
| 004 Configuring Alternate function registers.mp4 |
49.74MB |
| 004 Defining base addresses of AHB1 Peripherals_en.srt |
3.83KB |
| 004 Defining base addresses of AHB1 Peripherals.mp4 |
14.51MB |
| 004 Driver API input parameters and return types_en.srt |
11.40KB |
| 004 Driver API input parameters and return types.mp4 |
32.85MB |
| 004 Embedded Target_en.srt |
3.64KB |
| 004 Embedded Target.mp4 |
7.76MB |
| 004 Exercise Code implementation Part 2_en.srt |
10.25KB |
| 004 Exercise Code implementation Part 2.mp4 |
35.68MB |
| 004 Exercise Coding Part 3_en.srt |
14.92KB |
| 004 Exercise Coding Part 3_en.srt |
4.52KB |
| 004 Exercise Coding Part 3_en.srt |
4.36KB |
| 004 Exercise Coding Part 3.mp4 |
131.77MB |
| 004 Exercise Coding Part 3.mp4 |
18.55MB |
| 004 Exercise Coding Part 3.mp4 |
17.38MB |
| 004 Exercise Connecting external button and circuit explanation_en.srt |
11.95KB |
| 004 Exercise Connecting external button and circuit explanation.mp4 |
102.26MB |
| 004 Exercise HSI measurements_en.srt |
11.61KB |
| 004 Exercise HSI measurements.mp4 |
64.03MB |
| 004 Exercise Modifying I2C transactions_en.srt |
4.23KB |
| 004 Exercise Modifying I2C transactions.mp4 |
25.68MB |
| 004 Exercise Testing_en.srt |
7.13KB |
| 004 Exercise Testing.mp4 |
34.06MB |
| 004 GPIO input mode with pull-updown state_en.srt |
1.34KB |
| 004 GPIO input mode with pull-updown state.mp4 |
2.53MB |
| 004 GPIO output data register and summary of various modes discussed_en.srt |
3.08KB |
| 004 GPIO output data register and summary of various modes discussed.mp4 |
9.48MB |
| 004 GPIO pin Interrupt configuration coding Part 4_en.srt |
15.77KB |
| 004 GPIO pin Interrupt configuration coding Part 4.mp4 |
100.66MB |
| 004 I2C adding interrupt related macros and interrupt APIs_en.srt |
4.03KB |
| 004 I2C adding interrupt related macros and interrupt APIs.mp4 |
35.26MB |
| 004 I2C API prototypes_en.srt |
4.23KB |
| 004 I2C API prototypes.mp4 |
24.51MB |
| 004 I2C Data validity_en.srt |
4.44KB |
| 004 I2C Data validity.mp4 |
13.15MB |
| 004 I2C IRQ handler implementation Part 4_en.srt |
3.36KB |
| 004 I2C IRQ handler implementation Part 4.mp4 |
12.16MB |
| 004 Implementation of I2C master receive data API Part 2_en.srt |
3.77KB |
| 004 Implementation of I2C master receive data API Part 2.mp4 |
16.17MB |
| 004 Implementation of I2C master sending data API Part 3_en.srt |
6.56KB |
| 004 Implementation of I2C master sending data API Part 3.mp4 |
44.58MB |
| 004 Implementation of SPI send data API Part 4_en.srt |
1.41KB |
| 004 Implementation of SPI send data API Part 4.mp4 |
3.87MB |
| 004 Include path settings_en.srt |
2.36KB |
| 004 Include path settings.mp4 |
11.12MB |
| 004 Input configuration of a Microcontroller's GPIO Pin_en.srt |
15.79KB |
| 004 Input configuration of a Microcontroller's GPIO Pin.mp4 |
55.90MB |
| 004 OpenOCD and Semihosting to use printf_en.srt |
7.32KB |
| 004 OpenOCD and Semihosting to use printf.mp4 |
23.03MB |
| 004 openocd-semihosting-commands.txt |
321B |
| 004 PPT.pdf |
12.86MB |
| 004 RTC coding for set time and date_en.srt |
6.77KB |
| 004 RTC coding for set time and date.mp4 |
35.57MB |
| 004 Source Code and Slides.html |
138B |
| 004 SPI IRQ handler implementation Part 3_en.srt |
11.28KB |
| 004 SPI IRQ handler implementation Part 3.mp4 |
46.49MB |
| 004 SPI Minimum bus configuration_en.srt |
3.30KB |
| 004 SPI Minimum bus configuration.mp4 |
6.77MB |
| 004 Understanding MCU Bus Matrix_en.srt |
7.08KB |
| 004 Understanding MCU Bus Matrix.mp4 |
24.77MB |
| 004 USART-BaudCalculation.c |
1.71KB |
| 004 USART baudrate coding_en.srt |
6.89KB |
| 004 USART baudrate coding.mp4 |
29.98MB |
| 004 USART Driver API USART Init_en.srt |
2.40KB |
| 004 USART Driver API USART Init.mp4 |
13.59MB |
| 004 USART-Init.c |
3.27KB |
| 004 Using-the-STM32F2-and-STM32F4-DMA-controller.pdf |
1.40MB |
| 005 About USB logic analyzer_en.srt |
7.04KB |
| 005 About USB logic analyzer.mp4 |
42.13MB |
| 005 Defining base addresses of APB1 and APB2 Peripherals_en.srt |
2.12KB |
| 005 Defining base addresses of APB1 and APB2 Peripherals.mp4 |
6.55MB |
| 005 Documents required_en.srt |
4.06KB |
| 005 Documents required.mp4 |
10.80MB |
| 005 Driver empty API implementation and documentation_en.srt |
3.74KB |
| 005 Driver empty API implementation and documentation.mp4 |
9.15MB |
| 005 Exercise_en.srt |
16.26KB |
| 005 Exercise.mp4 |
65.56MB |
| 005 Exercise Code implementation Part 3_en.srt |
6.85KB |
| 005 Exercise Code implementation Part 3.mp4 |
25.19MB |
| 005 Exercise Testing_en.srt |
8.92KB |
| 005 Exercise Testing.mp4 |
62.24MB |
| 005 Exercise Testing button interface_en.srt |
3.56KB |
| 005 Exercise Testing button interface.mp4 |
22.30MB |
| 005 Exercise Testing repeated start_en.srt |
8.62KB |
| 005 Exercise Testing repeated start.mp4 |
36.27MB |
| 005 Expression and variable windows_en.srt |
7.22KB |
| 005 Expression and variable windows.mp4 |
21.16MB |
| 005 GPIO de-init API implementation_en.srt |
5.71KB |
| 005 GPIO de-init API implementation.mp4 |
24.52MB |
| 005 GPIO output mode with open drain state_en.srt |
6.14KB |
| 005 GPIO output mode with open drain state.mp4 |
10.89MB |
| 005 GPIO pin Interrupt configuration coding Part 5_en.srt |
10.56KB |
| 005 GPIO pin Interrupt configuration coding Part 5.mp4 |
62.08MB |
| 005 I2C IRQ handler implementation Part 5_en.srt |
3.99KB |
| 005 I2C IRQ handler implementation Part 5.mp4 |
32.92MB |
| 005 Implementation of I2C master sending data API Part 4_en.srt |
4.51KB |
| 005 Implementation of I2C master sending data API Part 4.mp4 |
12.35MB |
| 005 Important note on IDE usage.html |
619B |
| 005 Output Configuration of a GPIO Pin in Push pull mode_en.srt |
4.02KB |
| 005 Output Configuration of a GPIO Pin in Push pull mode.mp4 |
5.67MB |
| 005 Rating and Review.html |
784B |
| 005 RTC coding for get time and date_en.srt |
6.21KB |
| 005 RTC coding for get time and date.mp4 |
34.89MB |
| 005 SPI behind the scene data communication principle_en.srt |
5.92KB |
| 005 SPI behind the scene data communication principle.mp4 |
22.19MB |
| 005 Steps for I2C init implementation_en.srt |
5.67KB |
| 005 Steps for I2C init implementation.mp4 |
16.61MB |
| 005 Synchronization bits_en.srt |
1.22KB |
| 005 Synchronization bits.mp4 |
4.10MB |
| 005 USART-DataTxRxAPIs.c |
5.06KB |
| 005 USART Driver API Tx and Rx assignment_en.srt |
1.77KB |
| 005 USART Driver API Tx and Rx assignment.mp4 |
7.12MB |
| 006 BCD and Binary manipulation functions_en.srt |
8.25KB |
| 006 BCD and Binary manipulation functions.mp4 |
31.67MB |
| 006 Code implementation_en.srt |
16.07KB |
| 006 Code implementation.mp4 |
112.66MB |
| 006 Defining base addresses conclusion_en.srt |
6.25KB |
| 006 Defining base addresses conclusion.mp4 |
15.46MB |
| 006 Exercise Button interrupt introduction_en.srt |
1.34KB |
| 006 Exercise Button interrupt introduction.mp4 |
3.51MB |
| 006 Exercise Testing_en.srt |
21.19KB |
| 006 Exercise Testing.mp4 |
136.71MB |
| 006 GPIO output mode with push pull state_en.srt |
3.01KB |
| 006 GPIO output mode with push pull state.mp4 |
5.26MB |
| 006 GPIO pin Interrupt configuration coding Part 6_en.srt |
11.40KB |
| 006 GPIO pin Interrupt configuration coding Part 6.mp4 |
50.50MB |
| 006 I2C IRQ handler implementation Part 6_en.srt |
12.31KB |
| 006 I2C IRQ handler implementation Part 6.mp4 |
88.72MB |
| 006 Implementation of I2C master sending data API Part 5_en.srt |
2.77KB |
| 006 Implementation of I2C master sending data API Part 5.mp4 |
17.49MB |
| 006 main.c |
1.69KB |
| 006 Memory browser windows_en.srt |
11.85KB |
| 006 Memory browser windows.mp4 |
41.12MB |
| 006 Output Configuration of a GPIO Pin in open drain mode_en.srt |
6.57KB |
| 006 Output Configuration of a GPIO Pin in open drain mode.mp4 |
11.14MB |
| 006 UART Parity_en.srt |
3.60KB |
| 006 UART Parity.mp4 |
9.27MB |
| 006 USART Driver API Send data_en.srt |
6.07KB |
| 006 USART Driver API Send data.mp4 |
42.37MB |
| 007 Call stack and fault analyzers_en.srt |
10.46KB |
| 007 Call stack and fault analyzers.mp4 |
66.40MB |
| 007 Exercise HSE measurements_en.srt |
12.61KB |
| 007 Exercise HSE measurements.mp4 |
71.89MB |
| 007 GPIO pin Interrupt configuration coding Part 7_en.srt |
13.23KB |
| 007 GPIO pin Interrupt configuration coding Part 7.mp4 |
88.25MB |
| 007 I2C IRQ handler implementation Part 7_en.srt |
3.75KB |
| 007 I2C IRQ handler implementation Part 7.mp4 |
31.60MB |
| 007 Input stage of a GPIO pin during output configuration_en.srt |
833B |
| 007 Input stage of a GPIO pin during output configuration.mp4 |
1.25MB |
| 007 main.c |
2.25KB |
| 007 Optimizing IO power consumption_en.srt |
3.31KB |
| 007 Optimizing IO power consumption.mp4 |
6.86MB |
| 007 Writing RTC application_en.srt |
16.83KB |
| 007 Writing RTC application.mp4 |
82.84MB |
| 008 Alternate functionality Configuration of a GPIO pin_en.srt |
3.47KB |
| 008 Alternate functionality Configuration of a GPIO pin.mp4 |
6.59MB |
| 008 Data watch-points_en.srt |
6.12KB |
| 008 Data watch-points.mp4 |
38.85MB |
| 008 I2C IRQ handler implementation Part 8_en.srt |
4.90KB |
| 008 I2C IRQ handler implementation Part 8.mp4 |
41.58MB |
| 008 RTC and Systick_en.srt |
12.43KB |
| 008 RTC and Systick.mp4 |
50.44MB |
| 008 systick.txt |
604B |
| 009 GPIO out put type register explanation_en.srt |
1.42KB |
| 009 GPIO out put type register explanation.mp4 |
3.25MB |
| 009 I2C-ER-IRQHandling.c |
2.54KB |
| 009 I2C error IRQ handler implementation_en.srt |
3.51KB |
| 009 I2C error IRQ handler implementation.mp4 |
34.41MB |
| 009 LCD connections_en.srt |
5.31KB |
| 009 LCD connections.mp4 |
14.06MB |
| 009 SFR windows_en.srt |
5.59KB |
| 009 SFR windows.mp4 |
22.69MB |
| 010 Other basic features of IDE_en.srt |
6.83KB |
| 010 Other basic features of IDE.mp4 |
18.79MB |
| 010 Significance of LCD pins_en.srt |
6.86KB |
| 010 Significance of LCD pins.mp4 |
24.17MB |
| 011 LCD initialization_en.srt |
7.51KB |
| 011 LCD initialization.mp4 |
73.69MB |
| 012 LCD initialization flowchart_en.srt |
10.61KB |
| 012 LCD initialization flowchart.mp4 |
93.08MB |
| 013 Sending command and data to LCD_en.srt |
14.44KB |
| 013 Sending command and data to LCD.mp4 |
98.26MB |
| 014 Creating LCD command code_en.srt |
14.52KB |
| 014 Creating LCD command code.mp4 |
107.41MB |
| 015 Testing_en.srt |
17.66KB |
| 015 Testing.mp4 |
213.74MB |
| 1 |
67B |
| 10 |
97.61KB |
| 100 |
112.62KB |
| 101 |
600.83KB |
| 102 |
644.41KB |
| 103 |
769.93KB |
| 104 |
878.93KB |
| 105 |
961.09KB |
| 106 |
114.17KB |
| 107 |
79.15KB |
| 108 |
156.60KB |
| 109 |
633.16KB |
| 11 |
237.16KB |
| 110 |
220.58KB |
| 111 |
333.67KB |
| 112 |
410.98KB |
| 113 |
790.54KB |
| 114 |
143.22KB |
| 115 |
18.07KB |
| 116 |
51.10KB |
| 117 |
1022.20KB |
| 118 |
111.04KB |
| 119 |
171.39KB |
| 12 |
354.45KB |
| 120 |
178.34KB |
| 121 |
394.65KB |
| 122 |
420.26KB |
| 123 |
959.72KB |
| 124 |
54.35KB |
| 125 |
231.24KB |
| 126 |
326.29KB |
| 127 |
829.22KB |
| 128 |
221.03KB |
| 129 |
240.51KB |
| 13 |
778.24KB |
| 130 |
491.39KB |
| 131 |
503.57KB |
| 132 |
853.34KB |
| 133 |
182.52KB |
| 134 |
213.13KB |
| 135 |
991.68KB |
| 136 |
287.26KB |
| 137 |
315.34KB |
| 138 |
494.05KB |
| 139 |
501.74KB |
| 14 |
352.19KB |
| 140 |
609.28KB |
| 141 |
712.23KB |
| 142 |
829.73KB |
| 143 |
111.32KB |
| 144 |
859.31KB |
| 145 |
974.61KB |
| 146 |
139.28KB |
| 147 |
319.54KB |
| 148 |
368.18KB |
| 149 |
590.43KB |
| 15 |
603.00KB |
| 150 |
967.98KB |
| 151 |
252.33KB |
| 152 |
318.17KB |
| 153 |
557.92KB |
| 154 |
634.47KB |
| 155 |
785.15KB |
| 156 |
948.93KB |
| 157 |
94.24KB |
| 158 |
95.67KB |
| 159 |
218.16KB |
| 16 |
903.23KB |
| 160 |
458.58KB |
| 161 |
470.82KB |
| 162 |
515.41KB |
| 163 |
871.22KB |
| 164 |
83.06KB |
| 165 |
417.03KB |
| 166 |
522.58KB |
| 167 |
570.76KB |
| 168 |
632.77KB |
| 169 |
644.36KB |
| 17 |
105.44KB |
| 170 |
384.82KB |
| 171 |
404.05KB |
| 172 |
521.57KB |
| 173 |
550.85KB |
| 174 |
848.16KB |
| 175 |
276.52KB |
| 176 |
360.40KB |
| 177 |
555.22KB |
| 178 |
749.34KB |
| 179 |
771.37KB |
| 18 |
52.81KB |
| 180 |
799.07KB |
| 181 |
469.13KB |
| 182 |
505.16KB |
| 183 |
808.36KB |
| 184 |
930.09KB |
| 185 |
957.98KB |
| 186 |
417.94KB |
| 187 |
696.10KB |
| 188 |
866.51KB |
| 189 |
143.90KB |
| 19 |
549.97KB |
| 190 |
146.24KB |
| 191 |
651.90KB |
| 192 |
670.39KB |
| 193 |
746.39KB |
| 194 |
859.50KB |
| 195 |
860.32KB |
| 196 |
862.60KB |
| 197 |
56.71KB |
| 198 |
337.20KB |
| 199 |
418.40KB |
| 2 |
113.51KB |
| 20 |
762.51KB |
| 200 |
496.46KB |
| 201 |
807.04KB |
| 202 |
884.79KB |
| 203 |
899.02KB |
| 204 |
32.88KB |
| 205 |
105.79KB |
| 206 |
109.38KB |
| 207 |
207.82KB |
| 208 |
234.33KB |
| 209 |
353.65KB |
| 21 |
343.09KB |
| 210 |
576.22KB |
| 211 |
723.12KB |
| 212 |
890.07KB |
| 213 |
932.20KB |
| 214 |
62.15KB |
| 215 |
96.18KB |
| 216 |
159.22KB |
| 217 |
164.40KB |
| 218 |
455.16KB |
| 219 |
537.22KB |
| 22 |
1002.64KB |
| 220 |
749.39KB |
| 221 |
873.95KB |
| 222 |
22.44KB |
| 223 |
575.81KB |
| 224 |
577.10KB |
| 225 |
881.74KB |
| 226 |
960.86KB |
| 227 |
35.43KB |
| 228 |
219.78KB |
| 229 |
245.35KB |
| 23 |
176.68KB |
| 230 |
358.53KB |
| 231 |
455.86KB |
| 232 |
459.43KB |
| 233 |
548.44KB |
| 234 |
801.10KB |
| 235 |
807.31KB |
| 236 |
812.84KB |
| 237 |
896.54KB |
| 238 |
965.66KB |
| 239 |
141.22KB |
| 24 |
762.78KB |
| 240 |
233.37KB |
| 241 |
415.06KB |
| 242 |
455.88KB |
| 243 |
651.13KB |
| 244 |
751.14KB |
| 245 |
774.86KB |
| 246 |
801.94KB |
| 247 |
849.73KB |
| 248 |
186.34KB |
| 249 |
204.34KB |
| 25 |
137.34KB |
| 250 |
258.81KB |
| 251 |
332.35KB |
| 252 |
334.20KB |
| 253 |
568.67KB |
| 254 |
754.09KB |
| 255 |
792.58KB |
| 256 |
383.66KB |
| 257 |
925.60KB |
| 258 |
135.03KB |
| 259 |
141.83KB |
| 26 |
322.72KB |
| 260 |
506.29KB |
| 261 |
673.29KB |
| 262 |
765.02KB |
| 263 |
380.57KB |
| 264 |
382.21KB |
| 265 |
435.03KB |
| 266 |
477.75KB |
| 267 |
183.09KB |
| 268 |
618.32KB |
| 269 |
675.30KB |
| 27 |
944.73KB |
| 28 |
836.88KB |
| 29 |
793.11KB |
| 3 |
695.19KB |
| 30 |
926.45KB |
| 31 |
290.37KB |
| 32 |
768.80KB |
| 33 |
942.66KB |
| 34 |
790.18KB |
| 35 |
205.43KB |
| 36 |
982.06KB |
| 37 |
758.43KB |
| 38 |
862.82KB |
| 39 |
160.98KB |
| 4 |
725.20KB |
| 40 |
164.24KB |
| 41 |
509.34KB |
| 42 |
473.21KB |
| 43 |
158.88KB |
| 44 |
516.91KB |
| 45 |
770.48KB |
| 46 |
315.90KB |
| 47 |
803.58KB |
| 48 |
911.53KB |
| 49 |
114.27KB |
| 5 |
471.54KB |
| 50 |
109.22KB |
| 51 |
775.92KB |
| 52 |
868.74KB |
| 53 |
615.50KB |
| 54 |
449.58KB |
| 55 |
991.92KB |
| 56 |
210.97KB |
| 57 |
840.42KB |
| 58 |
483.84KB |
| 59 |
783.05KB |
| 6 |
269.23KB |
| 60 |
936.97KB |
| 61 |
592.92KB |
| 62 |
598.87KB |
| 63 |
99.77KB |
| 64 |
610.72KB |
| 65 |
37.17KB |
| 66 |
173.27KB |
| 67 |
418.35KB |
| 68 |
507.16KB |
| 69 |
570.87KB |
| 7 |
976.41KB |
| 70 |
678.07KB |
| 71 |
261.55KB |
| 72 |
417.83KB |
| 73 |
891.28KB |
| 74 |
520.51KB |
| 75 |
737.21KB |
| 76 |
425.79KB |
| 77 |
471.33KB |
| 78 |
696.99KB |
| 79 |
551.15KB |
| 8 |
300.36KB |
| 80 |
646.03KB |
| 81 |
886.42KB |
| 82 |
20.18KB |
| 83 |
427.14KB |
| 84 |
897.56KB |
| 85 |
440.80KB |
| 86 |
106.23KB |
| 87 |
1019.17KB |
| 88 |
158.50KB |
| 89 |
832.00KB |
| 9 |
601.63KB |
| 90 |
514.95KB |
| 91 |
750.29KB |
| 92 |
768.67KB |
| 93 |
164.52KB |
| 94 |
168.01KB |
| 95 |
331.33KB |
| 96 |
358.54KB |
| 97 |
440.25KB |
| 98 |
752.65KB |
| 99 |
938.44KB |
| external-links.txt |
83B |
| external-links.txt |
70B |
| external-links.txt |
108B |
| external-links.txt |
101B |
| TutsNode.net.txt |
63B |