|
Please note that this page does not hosts or makes available any of the listed filenames. You
cannot download any of those files from here.
|
| [TGx]Downloaded from torrentgalaxy.to .txt |
585B |
| 0 |
21B |
| 1 |
5B |
| 1.1 G81-Drilling-Cycle-12.png |
56.64KB |
| 1.1 header-16.png |
54.43KB |
| 1.1 Helical-milling-handout-9.png |
41.73KB |
| 1.1 The complete Doobry program - FREE!.html |
117B |
| 1.1 The-Doobry-large-drawing-1.png |
58.94KB |
| 1.1 trig-handout.png |
38.93KB |
| 1.2 Discount coupon for my course 'CNC lathe programming using G-Code'.html |
137B |
| 1.2 G81-Drilling-Cycle-122.png |
57.30KB |
| 1.2 Helical-milling-21.png |
89.20KB |
| 1.2 part-1-21.png |
58.92KB |
| 1.3 G81-Drilling-Cycle-35.png |
61.20KB |
| 1.3 GCodeTutor website.html |
82B |
| 1.3 part-1-angle-9.png |
47.90KB |
| 1.4 Machinists Handbook - Free EBook.html |
107B |
| 1.5 Coupon link for the course 'Foundation to CNC programming using G-Code '.html |
134B |
| 1. Bonus Information.mp4 |
34.10MB |
| 1. Bonus Information.srt |
3.55KB |
| 1. Final Quiz.html |
155B |
| 1. G81 Drilling cycle.mp4 |
22.21MB |
| 1. G81 Drilling cycle.srt |
10.19KB |
| 1. Helical Milling.mp4 |
24.04MB |
| 1. Helical Milling.srt |
10.40KB |
| 1. Introduction.mp4 |
22.67MB |
| 1. Introduction.srt |
1.02KB |
| 1. Mid Course Quiz.html |
155B |
| 1. Program header.mp4 |
8.20MB |
| 1. Program header.srt |
5.57KB |
| 1. Programming example part.mp4 |
17.93MB |
| 1. Programming example part.srt |
10.89KB |
| 1. Studying the engineering drawing.mp4 |
10.38MB |
| 1. Studying the engineering drawing.srt |
4.08KB |
| 10 |
167B |
| 11 |
2.56KB |
| 12 |
524B |
| 13 |
5.20KB |
| 14 |
13.27KB |
| 15 |
72.27KB |
| 2 |
53B |
| 2.1 Cutter-compensation-1.png |
57.97KB |
| 2.1 G82-counter-bore-cycle-G98-G99-1.png |
55.72KB |
| 2.1 Setting-the-datum-3.png |
28.18KB |
| 2.1 The-Doobry-prog-13.png |
81.68KB |
| 2.2 G82-counter-bore-cycle-handout-1.png |
53.07KB |
| 2.2 Setting-the-datum-5.png |
35.47KB |
| 2.2 Units-1.png |
32.15KB |
| 2.3 G82-counter-bore-cycle-1.png |
58.56KB |
| 2.3 MCODES-1.png |
46.18KB |
| 2. Covering the basics.mp4 |
12.97MB |
| 2. Covering the basics.srt |
6.83KB |
| 2. G82 Counter bore cycle.mp4 |
8.06MB |
| 2. G82 Counter bore cycle.srt |
3.27KB |
| 2. Roughing out the bore using helical spiral milling.mp4 |
33.05MB |
| 2. Roughing out the bore using helical spiral milling.srt |
10.94KB |
| 2. Setting the datums.mp4 |
6.60MB |
| 2. Setting the datums.srt |
4.43KB |
| 3 |
61B |
| 3.1 G83-peck-Drilling-Cycle-handout.png |
59.41KB |
| 3.1 planes-3.png |
43.80KB |
| 3.1 The-Doobry-prog-2-9.png |
69.83KB |
| 3.2 G83-peck-Drilling-Cycle-9.png |
55.31KB |
| 3.2 planes-4.png |
56.69KB |
| 3.3 G83-peck-Drilling-Cycle-2.png |
56.41KB |
| 3.3 planes-29.png |
79.56KB |
| 3.4 planes-1.png |
54.38KB |
| 3.5 planes-2.png |
45.57KB |
| 3. Defining the working plane using G17, G18 and G19.mp4 |
16.45MB |
| 3. Defining the working plane using G17, G18 and G19.srt |
7.16KB |
| 3. Finishing the bore using the G86 boring cycle.mp4 |
8.12MB |
| 3. Finishing the bore using the G86 boring cycle.srt |
3.22KB |
| 3. G83 Peck drilling cycle.mp4 |
15.30MB |
| 3. G83 Peck drilling cycle.srt |
6.02KB |
| 4 |
869B |
| 4.1 G84-Tapping-Cycle-handout.png |
57.84KB |
| 4.2 metric-coarse-tap-drill-chart.png |
32.58KB |
| 4.3 G84-Tapping-Cycle-1.png |
59.14KB |
| 4. G84 Tapping cycle.mp4 |
17.69MB |
| 4. G84 Tapping cycle.srt |
7.00KB |
| 5 |
665B |
| 5.1 G86-bore-cycle-G98-2.png |
35.12KB |
| 5.2 G85-bore-cycle-handout-1.png |
41.35KB |
| 5.3 G85-bore-cycle-1.png |
56.94KB |
| 5. G85 and G86 Boring cycles.mp4 |
9.55MB |
| 5. G85 and G86 Boring cycles.srt |
4.18KB |
| 6 |
1.39KB |
| 7 |
2.14KB |
| 8 |
2.21KB |
| 9 |
150B |
| TutsNode.com.txt |
63B |