|
Please note that this page does not hosts or makes available any of the listed filenames. You
cannot download any of those files from here.
|
| [TGx]Downloaded from torrentgalaxy.to .txt |
585B |
| 0 |
123B |
| 01 Introduction.en.srt |
4.92KB |
| 01 Introduction.en.vtt |
4.80KB |
| 01 Introduction.mp4 |
28.01MB |
| 02 What is Raspberry Pi and What Can You Do With it.en.srt |
6.75KB |
| 02 What is Raspberry Pi and What Can You Do With it.en.vtt |
6.57KB |
| 02 What is Raspberry Pi and What Can You Do With it.mp4 |
45.67MB |
| 03 List of Materials for this Course - and Recommendations.en.srt |
10.47KB |
| 03 List of Materials for this Course - and Recommendations.en.vtt |
10.12KB |
| 03 List of Materials for this Course - and Recommendations.mp4 |
39.82MB |
| 04 How to get the most out of this course.en.srt |
1.93KB |
| 04 How to get the most out of this course.en.vtt |
1.92KB |
| 04 How to get the most out of this course.mp4 |
5.56MB |
| 05 Install Raspberry Pi OS Without any External Monitor or Keyboard.en.srt |
1.56KB |
| 05 Install Raspberry Pi OS Without any External Monitor or Keyboard.en.vtt |
1.56KB |
| 05 Install Raspberry Pi OS Without any External Monitor or Keyboard.mp4 |
4.49MB |
| 06 Flash the Raspberry Pi OS on your micro SD card.en.srt |
4.48KB |
| 06 Flash the Raspberry Pi OS on your micro SD card.en.vtt |
4.38KB |
| 06 Flash the Raspberry Pi OS on your micro SD card.mp4 |
20.27MB |
| 07 Setup Wi-Fi and SSH Directly on the micro SD card.en.srt |
6.18KB |
| 07 Setup Wi-Fi and SSH Directly on the micro SD card.en.vtt |
6.01KB |
| 07 Setup Wi-Fi and SSH Directly on the micro SD card.mp4 |
32.48MB |
| 08 Boot your Raspberry Pi For the First Time and Find its IP address.en.srt |
10.54KB |
| 08 Boot your Raspberry Pi For the First Time and Find its IP address.en.vtt |
10.16KB |
| 08 Boot your Raspberry Pi For the First Time and Find its IP address.mp4 |
46.69MB |
| 09 Connect to Your Pi using SSH.en.srt |
7.39KB |
| 09 Connect to Your Pi using SSH.en.vtt |
7.18KB |
| 09 Connect to Your Pi using SSH.mp4 |
37.10MB |
| 1 |
476B |
| 10 |
171.17KB |
| 10 Setup VNC to Get a Remote Access to your Raspberry Pi OS Desktop.en.srt |
12.99KB |
| 10 Setup VNC to Get a Remote Access to your Raspberry Pi OS Desktop.en.vtt |
12.49KB |
| 10 Setup VNC to Get a Remote Access to your Raspberry Pi OS Desktop.mp4 |
132.66MB |
| 11 |
601.42KB |
| 11 Finish the Startup Configuration - Last Steps.en.srt |
15.18KB |
| 11 Finish the Startup Configuration - Last Steps.en.vtt |
14.58KB |
| 11 Finish the Startup Configuration - Last Steps.mp4 |
79.98MB |
| 12 |
21.67KB |
| 12 Program with Python3.en.srt |
1.20KB |
| 12 Program with Python3.en.vtt |
1.21KB |
| 12 Program with Python3.mp4 |
1.69MB |
| 13 |
246.14KB |
| 13 Your first Python program - Discover the Thonny IDE.en.srt |
14.62KB |
| 13 Your first Python program - Discover the Thonny IDE.en.vtt |
14.05KB |
| 13 Your first Python program - Discover the Thonny IDE.mp4 |
56.24MB |
| 14 |
581.87KB |
| 14 Variables.en.srt |
13.71KB |
| 14 Variables.en.vtt |
13.15KB |
| 14 Variables.mp4 |
47.47MB |
| 15 |
704.28KB |
| 15 Variables - Data Types.en.srt |
9.66KB |
| 15 Variables - Data Types.en.vtt |
9.32KB |
| 15 Variables - Data Types.mp4 |
38.32MB |
| 16 |
586.45KB |
| 16 Functions.en.srt |
12.74KB |
| 16 Functions.en.vtt |
12.21KB |
| 16 Functions.mp4 |
51.74MB |
| 17 |
571.13KB |
| 17 Variables - Scope.en.srt |
7.66KB |
| 17 Variables - Scope.en.vtt |
7.42KB |
| 17 Variables - Scope.mp4 |
41.14MB |
| 18 |
629.07KB |
| 18 Activity 01 - Create a Function to Concatenate 2 Uppercase Strings.en.srt |
3.33KB |
| 18 Activity 01 - Create a Function to Concatenate 2 Uppercase Strings.en.vtt |
3.27KB |
| 18 Activity 01 - Create a Function to Concatenate 2 Uppercase Strings.mp4 |
12.02MB |
| 19 |
869.02KB |
| 19 Activity 01 - Solution.en.srt |
10.00KB |
| 19 Activity 01 - Solution.en.vtt |
9.64KB |
| 19 Activity 01 - Solution.mp4 |
52.45MB |
| 2 |
61.06KB |
| 20 |
990.09KB |
| 20 Conditions.en.srt |
13.42KB |
| 20 Conditions.en.vtt |
12.85KB |
| 20 Conditions.mp4 |
59.63MB |
| 21 |
379.94KB |
| 21 Condition operators.en.srt |
14.10KB |
| 21 Condition operators.en.vtt |
13.52KB |
| 21 Condition operators.mp4 |
64.44MB |
| 22 |
619.27KB |
| 22 Activity 02 - Validate User Input.en.srt |
4.72KB |
| 22 Activity 02 - Validate User Input.en.vtt |
4.60KB |
| 22 Activity 02 - Validate User Input.mp4 |
20.82MB |
| 23 |
780.56KB |
| 23 Activity 02 - Solution.en.srt |
5.43KB |
| 23 Activity 02 - Solution.en.vtt |
5.28KB |
| 23 Activity 02 - Solution.mp4 |
36.56MB |
| 24 |
942.10KB |
| 24 Loops.en.srt |
16.63KB |
| 24 Loops.en.vtt |
15.92KB |
| 24 Loops.mp4 |
60.03MB |
| 25 |
841.46KB |
| 25 Lists.en.srt |
16.95KB |
| 25 Lists.en.vtt |
16.25KB |
| 25 Lists.mp4 |
72.43MB |
| 26 |
563.47KB |
| 26 Activity 03 - Compute Max Value Inside a List.en.srt |
2.72KB |
| 26 Activity 03 - Compute Max Value Inside a List.en.vtt |
2.68KB |
| 26 Activity 03 - Compute Max Value Inside a List.mp4 |
4.49MB |
| 27 |
271.00KB |
| 27 Activity 03 - Solution.en.srt |
11.98KB |
| 27 Activity 03 - Solution.en.vtt |
11.52KB |
| 27 Activity 03 - Solution.mp4 |
54.18MB |
| 28 |
653.17KB |
| 28 Python Modules.en.srt |
4.54KB |
| 28 Python Modules.en.vtt |
4.43KB |
| 28 Python Modules.mp4 |
16.80MB |
| 29 |
539.32KB |
| 29 Program with Python3 - Section Conclusion.en.srt |
1.26KB |
| 29 Program with Python3 - Section Conclusion.en.vtt |
1.28KB |
| 29 Program with Python3 - Section Conclusion.mp4 |
2.06MB |
| 3 |
379.03KB |
| 30 |
690.57KB |
| 30 Build Your First Raspberry Pi Circuit and Use GPIOs.en.srt |
1.08KB |
| 30 Build Your First Raspberry Pi Circuit and Use GPIOs.en.vtt |
1.10KB |
| 30 Build Your First Raspberry Pi Circuit and Use GPIOs.mp4 |
4.24MB |
| 31 |
319.10KB |
| 31 Warning - PLEASE WATCH - How to Safely Manipulate Your Board.en.srt |
4.41KB |
| 31 Warning - PLEASE WATCH - How to Safely Manipulate Your Board.en.vtt |
4.32KB |
| 31 Warning - PLEASE WATCH - How to Safely Manipulate Your Board.mp4 |
12.23MB |
| 32 |
342.16KB |
| 32 Understand How a Breadboard Works.en.srt |
6.10KB |
| 32 Understand How a Breadboard Works.en.vtt |
5.92KB |
| 32 Understand How a Breadboard Works.mp4 |
55.08MB |
| 33 |
151.92KB |
| 33 The Resistors Color Code.en.srt |
6.87KB |
| 33 The Resistors Color Code.en.vtt |
6.66KB |
| 33 The Resistors Color Code.mp4 |
30.39MB |
| 34 |
436.42KB |
| 34 Build Your First Circuit - 1 LED and 1 resistor.en.srt |
9.02KB |
| 34 Build Your First Circuit - 1 LED and 1 resistor.en.vtt |
8.71KB |
| 34 Build Your First Circuit - 1 LED and 1 resistor.mp4 |
116.42MB |
| 35 |
881.42KB |
| 35 How GPIOs Work.en.srt |
4.39KB |
| 35 How GPIOs Work.en.vtt |
4.28KB |
| 35 How GPIOs Work.mp4 |
37.85MB |
| 36 |
159.13KB |
| 36 Create a Python Program to Make an LED Blink.en.srt |
11.96KB |
| 36 Create a Python Program to Make an LED Blink.en.vtt |
11.51KB |
| 36 Create a Python Program to Make an LED Blink.mp4 |
39.65MB |
| 37 |
185.76KB |
| 37 Activity 04 - Set the LED’s State From User Input.en.srt |
2.12KB |
| 37 Activity 04 - Set the LED’s State From User Input.en.vtt |
2.09KB |
| 37 Activity 04 - Set the LED’s State From User Input.mp4 |
3.47MB |
| 38 |
355.36KB |
| 38 Activity 04 - Solution.en.srt |
9.52KB |
| 38 Activity 04 - Solution.en.vtt |
9.15KB |
| 38 Activity 04 - Solution.mp4 |
29.01MB |
| 39 |
695.39KB |
| 39 Add a Push Button to Your Circuit.en.srt |
10.04KB |
| 39 Add a Push Button to Your Circuit.en.vtt |
9.71KB |
| 39 Add a Push Button to Your Circuit.mp4 |
108.69MB |
| 4 |
829.59KB |
| 40 |
153.55KB |
| 40 Detect When a Button is Pressed with Python.en.srt |
5.06KB |
| 40 Detect When a Button is Pressed with Python.en.vtt |
4.92KB |
| 40 Detect When a Button is Pressed with Python.mp4 |
15.24MB |
| 41 |
562.23KB |
| 41 Activity 05 Power ON the LED When the Button is Pressed.en.srt |
1.18KB |
| 41 Activity 05 Power ON the LED When the Button is Pressed.en.vtt |
1.19KB |
| 41 Activity 05 Power ON the LED When the Button is Pressed.mp4 |
5.14MB |
| 42 |
600.40KB |
| 42 Activity 05 - Solution.en.srt |
9.70KB |
| 42 Activity 05 - Solution.en.vtt |
9.33KB |
| 42 Activity 05 - Solution.mp4 |
56.40MB |
| 43 |
926.63KB |
| 43 Add 2 More LEDs to Your Circuit.en.srt |
6.47KB |
| 43 Add 2 More LEDs to Your Circuit.en.vtt |
6.27KB |
| 43 Add 2 More LEDs to Your Circuit.mp4 |
72.76MB |
| 44 |
448.83KB |
| 44 Activity 06 - Change the Powered on LED When Pressing the Button.en.srt |
2.21KB |
| 44 Activity 06 - Change the Powered on LED When Pressing the Button.en.vtt |
2.18KB |
| 44 Activity 06 - Change the Powered on LED When Pressing the Button.mp4 |
19.88MB |
| 45 |
508.01KB |
| 45 Activity 06 - Solution.en.srt |
14.77KB |
| 45 Activity 06 - Solution.en.vtt |
14.15KB |
| 45 Activity 06 - Solution.mp4 |
47.33MB |
| 46 |
755.40KB |
| 46 Activity 07 - Optimize Your Code with Lists and Functions.en.srt |
3.01KB |
| 46 Activity 07 - Optimize Your Code with Lists and Functions.en.vtt |
2.96KB |
| 46 Activity 07 - Optimize Your Code with Lists and Functions.mp4 |
10.75MB |
| 47 |
527.55KB |
| 47 Activity 07 - Solution.en.srt |
18.83KB |
| 47 Activity 07 - Solution.en.vtt |
17.99KB |
| 47 Activity 07 - Solution.mp4 |
65.43MB |
| 48 |
802.05KB |
| 48 Detect Movement with a PIR Sensor.en.srt |
3.91KB |
| 48 Detect Movement with a PIR Sensor.en.vtt |
3.83KB |
| 48 Detect Movement with a PIR Sensor.mp4 |
11.03MB |
| 49 |
475.55KB |
| 49 Tune the PIR sensor.en.srt |
6.29KB |
| 49 Tune the PIR sensor.en.vtt |
6.10KB |
| 49 Tune the PIR sensor.mp4 |
30.16MB |
| 5 |
598.94KB |
| 50 |
628.47KB |
| 50 Add the PIR Sensor to Your Circuit.en.srt |
9.29KB |
| 50 Add the PIR Sensor to Your Circuit.en.vtt |
8.97KB |
| 50 Add the PIR Sensor to Your Circuit.mp4 |
122.19MB |
| 51 |
855.27KB |
| 51 Read the PIR’s Data with Python.en.srt |
7.92KB |
| 51 Read the PIR’s Data with Python.en.vtt |
7.66KB |
| 51 Read the PIR’s Data with Python.mp4 |
25.90MB |
| 52 |
1010.95KB |
| 52 Activity 08 - Power on an LED when Motion is Detected - Your First Alarm System.en.srt |
722B |
| 52 Activity 08 - Power on an LED when Motion is Detected - Your First Alarm System.en.vtt |
755B |
| 52 Activity 08 - Power on an LED when Motion is Detected - Your First Alarm System.mp4 |
5.06MB |
| 53 |
803.99KB |
| 53 Activity 08 - Solution.en.srt |
3.89KB |
| 53 Activity 08 - Solution.en.vtt |
3.80KB |
| 53 Activity 08 - Solution.mp4 |
27.78MB |
| 54 |
981.85KB |
| 54 Use the Terminal on Your Raspberry Pi.en.srt |
2.85KB |
| 54 Use the Terminal on Your Raspberry Pi.en.vtt |
2.81KB |
| 54 Use the Terminal on Your Raspberry Pi.mp4 |
14.34MB |
| 55 |
1014.35KB |
| 55 Navigation and File System.en.srt |
21.45KB |
| 55 Navigation and File System.en.vtt |
20.48KB |
| 55 Navigation and File System.mp4 |
246.52MB |
| 56 |
228.89KB |
| 56 Edit Files From the Terminal with Nano.en.srt |
11.73KB |
| 56 Edit Files From the Terminal with Nano.en.vtt |
11.28KB |
| 56 Edit Files From the Terminal with Nano.mp4 |
91.11MB |
| 57 |
395.91KB |
| 57 Create, Remove, and Manipulate Files.en.srt |
10.15KB |
| 57 Create, Remove, and Manipulate Files.en.vtt |
9.77KB |
| 57 Create, Remove, and Manipulate Files.mp4 |
114.70MB |
| 58 |
97.96KB |
| 58 Install & Update Software.en.srt |
13.52KB |
| 58 Install & Update Software.en.vtt |
12.99KB |
| 58 Install & Update Software.mp4 |
94.05MB |
| 59 |
928.26KB |
| 59 A Few More Terminal Commands to Gain More Control Over Your Raspberry Pi.en.srt |
4.89KB |
| 59 A Few More Terminal Commands to Gain More Control Over Your Raspberry Pi.en.vtt |
4.77KB |
| 59 A Few More Terminal Commands to Gain More Control Over Your Raspberry Pi.mp4 |
22.90MB |
| 6 |
305.72KB |
| 60 |
300.31KB |
| 60 Install Python Modules.en.srt |
5.17KB |
| 60 Install Python Modules.en.vtt |
5.03KB |
| 60 Install Python Modules.mp4 |
28.04MB |
| 61 |
798.14KB |
| 61 Work with Python from the Terminal.en.srt |
13.42KB |
| 61 Work with Python from the Terminal.en.vtt |
12.89KB |
| 61 Work with Python from the Terminal.mp4 |
42.85MB |
| 62 |
102.44KB |
| 62 Read, Write, and Manipulate Files with Python.en.srt |
14.13KB |
| 62 Read, Write, and Manipulate Files with Python.en.vtt |
13.54KB |
| 62 Read, Write, and Manipulate Files with Python.mp4 |
25.09MB |
| 63 |
874.15KB |
| 63 Activity 09 - Create a new Python Script From the Terminal.en.srt |
3.15KB |
| 63 Activity 09 - Create a new Python Script From the Terminal.en.vtt |
3.09KB |
| 63 Activity 09 - Create a new Python Script From the Terminal.mp4 |
8.73MB |
| 64 |
97.41KB |
| 64 Activity 09 - Solution.en.srt |
6.29KB |
| 64 Activity 09 - Solution.en.vtt |
6.11KB |
| 64 Activity 09 - Solution.mp4 |
60.15MB |
| 65 |
179.69KB |
| 65 Send an Email From Your Raspberry Pi.en.srt |
1.50KB |
| 65 Send an Email From Your Raspberry Pi.en.vtt |
1.50KB |
| 65 Send an Email From Your Raspberry Pi.mp4 |
3.88MB |
| 66 |
749.77KB |
| 66 Create a new Gmail Account.en.srt |
5.37KB |
| 66 Create a new Gmail Account.en.vtt |
5.22KB |
| 66 Create a new Gmail Account.mp4 |
26.61MB |
| 67 |
120.74KB |
| 67 Install a new Python Module yagmail.en.srt |
3.94KB |
| 67 Install a new Python Module yagmail.en.vtt |
3.85KB |
| 67 Install a new Python Module yagmail.mp4 |
11.40MB |
| 68 |
200.65KB |
| 68 Get the Password in Your Python Program.en.srt |
10.34KB |
| 68 Get the Password in Your Python Program.en.vtt |
9.98KB |
| 68 Get the Password in Your Python Program.mp4 |
32.22MB |
| 69 |
782.89KB |
| 69 Send Your First Email From the Raspberry Pi.en.srt |
5.97KB |
| 69 Send Your First Email From the Raspberry Pi.en.vtt |
5.80KB |
| 69 Send Your First Email From the Raspberry Pi.mp4 |
34.50MB |
| 7 |
316.53KB |
| 70 |
678.69KB |
| 70 Add an Attachment to Your Email.en.srt |
3.56KB |
| 70 Add an Attachment to Your Email.en.vtt |
3.48KB |
| 70 Add an Attachment to Your Email.mp4 |
10.92MB |
| 71 |
783.55KB |
| 71 Add Vision to Your Applications with the Raspberry Pi Camera V2 Module.en.srt |
2.91KB |
| 71 Add Vision to Your Applications with the Raspberry Pi Camera V2 Module.en.vtt |
2.86KB |
| 71 Add Vision to Your Applications with the Raspberry Pi Camera V2 Module.mp4 |
10.37MB |
| 72 |
1000.29KB |
| 72 Plug the Camera to Your Raspberry Pi.en.srt |
3.71KB |
| 72 Plug the Camera to Your Raspberry Pi.en.vtt |
3.63KB |
| 72 Plug the Camera to Your Raspberry Pi.mp4 |
48.36MB |
| 73 |
617.46KB |
| 73 Enable the Camera.en.srt |
2.06KB |
| 73 Enable the Camera.en.vtt |
2.04KB |
| 73 Enable the Camera.mp4 |
20.90MB |
| 74 |
995.51KB |
| 74 Take a Photo From the Terminal.en.srt |
6.72KB |
| 74 Take a Photo From the Terminal.en.vtt |
6.52KB |
| 74 Take a Photo From the Terminal.mp4 |
81.41MB |
| 75 |
79.47KB |
| 75 Record a Video From the Terminal.en.srt |
3.44KB |
| 75 Record a Video From the Terminal.en.vtt |
3.36KB |
| 75 Record a Video From the Terminal.mp4 |
39.84MB |
| 76 |
257.43KB |
| 76 Take a Photo with Python.en.srt |
8.64KB |
| 76 Take a Photo with Python.en.vtt |
8.35KB |
| 76 Take a Photo with Python.mp4 |
24.71MB |
| 77 |
418.41KB |
| 77 Record a Video with Python.en.srt |
4.31KB |
| 77 Record a Video with Python.en.vtt |
4.19KB |
| 77 Record a Video with Python.mp4 |
24.22MB |
| 78 |
646.25KB |
| 78 Activity 10 - Take a Series of Pictures.en.srt |
2.27KB |
| 78 Activity 10 - Take a Series of Pictures.en.vtt |
2.25KB |
| 78 Activity 10 - Take a Series of Pictures.mp4 |
5.59MB |
| 79 |
280.82KB |
| 79 Activity 10 - Solution.en.srt |
8.28KB |
| 79 Activity 10 - Solution.en.vtt |
7.99KB |
| 79 Activity 10 - Solution.mp4 |
28.21MB |
| 8 |
976.72KB |
| 80 |
542.07KB |
| 80 Create a Web Application on Your Raspberry Pi with Flask and Python.en.srt |
2.50KB |
| 80 Create a Web Application on Your Raspberry Pi with Flask and Python.en.vtt |
2.47KB |
| 80 Create a Web Application on Your Raspberry Pi with Flask and Python.mp4 |
4.00MB |
| 81 |
421.25KB |
| 81 Write Your First Web Server.en.srt |
9.34KB |
| 81 Write Your First Web Server.en.vtt |
9.03KB |
| 81 Write Your First Web Server.mp4 |
41.57MB |
| 82 |
446.64KB |
| 82 Add a new URL and Connect Flask with GPIOs.en.srt |
6.70KB |
| 82 Add a new URL and Connect Flask with GPIOs.en.vtt |
6.50KB |
| 82 Add a new URL and Connect Flask with GPIOs.mp4 |
22.15MB |
| 83 |
885.30KB |
| 83 Activity 11 - Choose Which LED to Power on From a Web Browser.en.srt |
3.50KB |
| 83 Activity 11 - Choose Which LED to Power on From a Web Browser.en.vtt |
3.42KB |
| 83 Activity 11 - Choose Which LED to Power on From a Web Browser.mp4 |
10.59MB |
| 84 |
961.76KB |
| 84 Activity 11 - Solution.en.srt |
8.67KB |
| 84 Activity 11 - Solution.en.vtt |
8.36KB |
| 84 Activity 11 - Solution.mp4 |
31.54MB |
| 85 |
522.59KB |
| 85 Final Course Project - Overview.en.srt |
7.68KB |
| 85 Final Course Project - Overview.en.vtt |
7.47KB |
| 85 Final Course Project - Overview.mp4 |
37.41MB |
| 86 |
525.15KB |
| 86 Project - Step 1.en.srt |
22.83KB |
| 86 Project - Step 1.en.vtt |
21.83KB |
| 86 Project - Step 1.mp4 |
70.31MB |
| 87 |
775.57KB |
| 87 Project - Step 2.en.srt |
9.82KB |
| 87 Project - Step 2.en.vtt |
9.51KB |
| 87 Project - Step 2.mp4 |
33.26MB |
| 88 |
904.67KB |
| 88 Project - Step 3.en.srt |
9.48KB |
| 88 Project - Step 3.en.vtt |
9.15KB |
| 88 Project - Step 3.mp4 |
87.83MB |
| 89 |
3.47KB |
| 89 Project - Step 4.en.srt |
11.14KB |
| 89 Project - Step 4.en.vtt |
10.72KB |
| 89 Project - Step 4.mp4 |
127.63MB |
| 9 |
912.23KB |
| 90 |
118.55KB |
| 90 Project - Step 5.en.srt |
18.42KB |
| 90 Project - Step 5.en.vtt |
17.65KB |
| 90 Project - Step 5.mp4 |
63.39MB |
| 91 |
544.76KB |
| 91 Project - Step 6.en.srt |
10.96KB |
| 91 Project - Step 6.en.vtt |
10.54KB |
| 91 Project - Step 6.mp4 |
37.45MB |
| 92 |
38.89KB |
| 92 Project - Step 7.en.srt |
20.85KB |
| 92 Project - Step 7.en.vtt |
19.98KB |
| 92 Project - Step 7.mp4 |
168.20MB |
| 93 |
482.25KB |
| 93 Project Conclusion - Going Further.en.srt |
1.85KB |
| 93 Project Conclusion - Going Further.en.vtt |
1.85KB |
| 93 Project Conclusion - Going Further.mp4 |
4.12MB |
| 94 |
960.92KB |
| 94 What You’ve Learned.en.srt |
1.81KB |
| 94 What You’ve Learned.en.vtt |
1.80KB |
| 94 What You’ve Learned.mp4 |
2.96MB |
| 95 What to do next.en.srt |
3.15KB |
| 95 What to do next.en.vtt |
3.10KB |
| 95 What to do next.mp4 |
6.47MB |
| code_activities.zip |
4.00KB |
| code_course_project.zip |
4.24KB |
| Final project - Instructions and Tips to Get Started.pdf |
51.63KB |
| hardware_schematics.zip |
2.53MB |
| List of Materials - Raspberry Pi For Beginners Course.pdf |
61.87KB |
| Terminal Commands - Quick cheat-sheet.pdf |
27.40KB |
| TutsNode.com.txt |
63B |
| wpa_supplicant.conf |
164B |