|
Обратите внимание, что наш сайт не размещает какие-либо файлы из списка. Вы не можете скачать
эти файлы или скачать torrent-файл.
|
| 1.1 1 floor facing without wall.prt |
434.75Кб |
| 1.1 FACING_setup_1.prt |
277.27Кб |
| 1.1 Feature_based_machining.prt |
2.39Мб |
| 1.1 multi_axis_roughing_1.prt |
4.89Мб |
| 1.1 Rotary floor.prt |
5.81Мб |
| 1.1 SpotDrill_Drilling.prt |
2.77Мб |
| 1.2 FACING.prt |
157.84Кб |
| 1. Blank Geometry setup.mp4 |
160.97Мб |
| 1. Facing & Rough Turning.mp4 |
190.02Мб |
| 1. Feature based machining 1.mp4 |
115.96Мб |
| 1. Floor Facing without wall.mp4 |
115.23Мб |
| 1. Introduction.mp4 |
204.86Мб |
| 1. Mill Rotary.mp4 |
225.89Мб |
| 1. Multi Axis Roughing.mp4 |
100.93Мб |
| 1. Spot Drill.mp4 |
83.80Мб |
| 10.1 18.1 Adaptive milling.prt |
676.41Кб |
| 10.1 5_AXIS_DEBURRING.prt |
766.62Кб |
| 10.1 9 HOLE_MILLING.prt |
448.78Кб |
| 10.1 GROOVE_FACE.prt |
294.83Кб |
| 10. 5_AXIS_DEBURRING.mp4 |
44.54Мб |
| 10. Adaptive milling.mp4 |
84.92Мб |
| 10. Boss Milling.mp4 |
78.02Мб |
| 10. Hole Milling.mp4 |
142.74Мб |
| 10. Rough Turn Prime.mp4 |
49.83Мб |
| 11.1 11 PLANAR_PROFILING wireframe.prt |
396.95Кб |
| 11.1 18.2 adaptive_milling_1.prt |
418.17Кб |
| 11.1 Radial Cut Drive MultiAxis.prt |
457.90Кб |
| 11. Adaptive milling.mp4 |
25.02Мб |
| 11. Finish Turn Prime.mp4 |
22.73Мб |
| 11. PLANAR_PROFILING wireframe.mp4 |
45.70Мб |
| 11. Radial Cut Drive MultiAxis.mp4 |
53.66Мб |
| 12.1 12 PLANAR_MILL.prt |
430.04Кб |
| 12.1 18.3 adaptive_milling.prt |
630.03Кб |
| 12.1 Spiral Drive MultiAxis.prt |
920.14Кб |
| 12. Adaptive milling.mp4 |
48.41Мб |
| 12. Part Off..mp4 |
30.18Мб |
| 12. Planar Mill.mp4 |
115.25Мб |
| 12. Spiral Drive MultiAxis.mp4 |
63.33Мб |
| 13.1 12.1 Planar Milling with trim boundary.prt |
539.54Кб |
| 13.1 18.4 adaptive_milling.prt |
343.58Кб |
| 13.1 Zlevel_5Axis Part1.prt |
1.14Мб |
| 13. Adaptive milling.mp4 |
43.89Мб |
| 13. Planar Milling with trim boundary.mp4 |
81.89Мб |
| 13. Zlevel_5Axis Part1.mp4 |
122.33Мб |
| 14.1 12.2 PLANAR_MILL.prt |
483.80Кб |
| 14.1 guiding_curves_1.prt |
7.46Мб |
| 14.1 Zlevel_5Axis Part2.prt |
1.29Мб |
| 14. FIXED_AXIS_GUIDING_CURVES 1.mp4 |
77.47Мб |
| 14. Planar Milling with open boundary.mp4 |
63.05Мб |
| 14. Zlevel_5Axis Part2.mp4 |
151.99Мб |
| 15.1 12.3 Planar Milling (Finish Walls, Finish Floor, Cleanup corners).prt |
776.60Кб |
| 15.1 Guiding_curve 2.prt |
7.57Мб |
| 15. FIXED_AXIS_GUIDING_CURVES 2.mp4 |
71.19Мб |
| 15. Planar Milling (Finish Walls, Finish Floor, Cleanup corners).mp4 |
113.47Мб |
| 16.1 13 FACE_MILLING_MANUAL.prt |
331.08Кб |
| 16.1 guiding_curves_3.prt |
7.57Мб |
| 16. Face milling Manual.mp4 |
78.75Мб |
| 16. FIXED_AXIS_GUIDING_CURVES 3.mp4 |
58.42Мб |
| 17.1 14 PLANAR_TEXT.prt |
603.85Кб |
| 17.1 guiding_curves_4.prt |
4.05Мб |
| 17. FIXED_AXIS_GUIDING_CURVES 4.mp4 |
76.52Мб |
| 17. Planar Text.mp4 |
67.09Мб |
| 18.1 Guiding Curve Racetrack.prt |
399.72Кб |
| 18. Guiding Curve Racetrack.mp4 |
47.26Мб |
| 19.1 CURVE POINT DRIVE.prt |
483.12Кб |
| 19. Curve point drive.mp4 |
45.39Мб |
| 2.1 15 Cavity milling.prt |
2.54Мб |
| 2.1 2 floor and wall.prt |
594.45Кб |
| 2.1 Curve Point drive 1.prt |
2.75Мб |
| 2.1 Feature_machining2.prt |
1.24Мб |
| 2.1 FINISH_TURN_OD.prt |
2.28Мб |
| 2. Cavity Mill.mp4 |
100.66Мб |
| 2. Curve Point drive 1.mp4 |
195.89Мб |
| 2. Drilling.mp4 |
95.71Мб |
| 2. Feature based machining 2.mp4 |
74.13Мб |
| 2. Finish Turning.mp4 |
35.63Мб |
| 2. Floor and Wall.mp4 |
188.51Мб |
| 20.1 CURVE POINT DRIVE 1.prt |
610.03Кб |
| 20. Curve point drive 1.mp4 |
44.94Мб |
| 21.1 21.2 Contour area.prt |
640.16Кб |
| 21. Contour area.mp4 |
66.26Мб |
| 22.1 21. contour area.prt |
3.66Мб |
| 22. Contour area 1.0.mp4 |
65.84Мб |
| 23.1 21.1.prt |
3.59Мб |
| 23. Contour area 2.0.mp4 |
44.00Мб |
| 24.1 21.3 Contour Area (Spiral).prt |
584.72Кб |
| 24. Contour area 3.0.mp4 |
42.89Мб |
| 25. CONTOUR_AREA_CONCENTRIC_ZIGZAG.mp4 |
80.54Мб |
| 26.1 Boundary Drive 1.prt |
434.10Кб |
| 26. Boundary Drive 1.mp4 |
57.89Мб |
| 27.1 Boundary Drive 2.prt |
662.06Кб |
| 27. Boundary Drive 2.mp4 |
44.48Мб |
| 28.1 Boundary Drive (Radial Pattern).prt |
284.35Кб |
| 28. Boundary Drive (Radial Pattern).mp4 |
105.03Мб |
| 29.1 SOLID PROFILE 3D.prt |
551.19Кб |
| 29. SolidProfile 3D.mp4 |
63.59Мб |
| 3.1 15 Cavity Mill.prt |
5.46Мб |
| 3.1 3 POCKETING.prt |
617.99Кб |
| 3.1 Curve Point Drive 2.0.prt |
709.43Кб |
| 3.1 GROOVE_OD.prt |
2.25Мб |
| 3. Cavity Mill 2.mp4 |
106.16Мб |
| 3. Curve Point drive 2.mp4 |
48.15Мб |
| 3. Groove OD.mp4 |
137.43Мб |
| 3. Pocketing.mp4 |
105.90Мб |
| 3. Tapping.mp4 |
99.10Мб |
| 30.1 multi_axis_deburring_2.prt |
841.59Кб |
| 30. MultiAxis_Deburring.mp4 |
65.21Мб |
| 31.1 27 Contour Text.prt |
278.86Кб |
| 31. Contour text.mp4 |
102.65Мб |
| 32.1 streamline 1.0.prt |
868.86Кб |
| 32. Streamline 1.0.mp4 |
39.69Мб |
| 33.1 Streamline 2.0.prt |
736.82Кб |
| 33. Streamline 2.0.mp4 |
55.41Мб |
| 34.1 Streamline 3.0.prt |
446.40Кб |
| 34. Streamline 3.0.mp4 |
97.61Мб |
| 35.1 FLOW CUT DRIVE.prt |
2.18Мб |
| 35. FlowCut Drive.mp4 |
162.23Мб |
| 36.1 REST MILLING1.prt |
11.95Мб |
| 36. FlowCut Referance Tool.mp4 |
54.46Мб |
| 37.1 CONTOUR_SURFACE_AREA_1.prt |
245.23Кб |
| 37. Contour Surface area 1..mp4 |
83.97Мб |
| 38.1 CONTOUR_SURFACE_AREA_2.prt |
737.92Кб |
| 38. Contour Surface area 2.mp4 |
79.16Мб |
| 39.1 CONTOUR_SURFACE_AREA_3.prt |
399.36Кб |
| 39. Contour Surface area 3.mp4 |
73.02Мб |
| 4.1 15.3 cavity mill 3.prt |
831.95Кб |
| 4.1 3.1 POCKETING_undercut.prt |
1.45Мб |
| 4.1 Contour Profile 3.prt |
648.50Кб |
| 4.1 PROJECT_TURN.prt |
441.54Кб |
| 4.1 SpotDrill_Drilling.prt |
4.19Мб |
| 4. Cavity Mill for predrill.mp4 |
111.66Мб |
| 4. Contour Profile 3.0.mp4 |
82.34Мб |
| 4. Groove OD 2.mp4 |
47.74Мб |
| 4. Hole milling.mp4 |
81.97Мб |
| 4. Pocketing Milling undercut.mp4 |
48.48Мб |
| 40.1 Die Assembly.zip |
4.31Мб |
| 40.2 Die_mold.stp |
534.16Кб |
| 40. Milling 3axis Project.mp4 |
36.00Мб |
| 5.1 15.4 cavity mill 4.prt |
348.18Кб |
| 5.1 4 WALL_PROFILING without wall.prt |
458.55Кб |
| 5.1 GROOVE_FACE.prt |
284.83Кб |
| 5.1 Tube Finishing.mp4 |
28.26Мб |
| 5. Cavity Mill trim boundary.mp4 |
61.22Мб |
| 5. Groove Face.mp4 |
68.48Мб |
| 5. Hole Chamfer.mp4 |
50.26Мб |
| 5. Tube Rough.mp4 |
100.03Мб |
| 5. Wall Profiling without wall.mp4 |
135.99Мб |
| 6.1 15.1 cavity mill 2.prt |
729.85Кб |
| 6.1 5 WALL_FLOOR_PROFILING with wall.prt |
1.17Мб |
| 6.1 PROJECT_TURN.prt |
441.54Кб |
| 6. 2D Profile with floor.mp4 |
78.76Мб |
| 6. Cavity Mill (Report shortest tool).mp4 |
48.72Мб |
| 6. Centerline Drilling.mp4 |
82.36Мб |
| 6. Thread Milling.mp4 |
44.42Мб |
| 6. Tube Finishing.mp4 |
28.23Мб |
| 7.1 6 CHAMFERING_MODELED_1.prt |
1.64Мб |
| 7.1 RADIAL GROOVE1.prt |
160.76Кб |
| 7.1 REST MILLING1.prt |
10.10Мб |
| 7.1 ROUGH_BORE_ID.prt |
434.75Кб |
| 7.1 ToolPath Drive.prt |
1.56Мб |
| 7. Chamfer Milling.mp4 |
88.33Мб |
| 7. Radial Groove.mp4 |
69.63Мб |
| 7. Rest Milling.mp4 |
232.60Мб |
| 7. Rough Turn ID.mp4 |
31.68Мб |
| 7. ToolPath Drive.mp4 |
131.20Мб |
| 8.1 7 PLANAR_DEBURRING.prt |
995.99Кб |
| 8.1 Sequential_drill.prt |
256.93Кб |
| 8.1 Variable Contour_Surface Drive.prt |
6.02Мб |
| 8. Finish Turn ID.mp4 |
16.00Мб |
| 8. Planar Deburring.mp4 |
176.54Мб |
| 8. Sequential Drilling.mp4 |
59.91Мб |
| 8. Variable Contour_Surface Drive.mp4 |
83.79Мб |
| 8. ZLevel Profile.mp4 |
138.69Мб |
| 9.1 17.2 ZLevel Profile (Reference Tool).prt |
1.12Мб |
| 9.1 8 GROOVE_MILLING.prt |
516.16Кб |
| 9.1 deep-drilling.prt |
899.61Кб |
| 9.1 Streamline drive method.prt |
1.51Мб |
| 9. Deep Hole Drilling.mp4 |
69.93Мб |
| 9. Groove ID.mp4 |
29.96Мб |
| 9. Groove Milling.mp4 |
66.42Мб |
| 9. Variable Streamline 1.mp4 |
144.07Мб |
| 9. ZLevel Profile (Reference Tool).mp4 |
104.08Мб |