|
Обратите внимание, что наш сайт не размещает какие-либо файлы из списка. Вы не можете скачать
эти файлы или скачать torrent-файл.
|
| _Going 3D_2013.SLDPRT |
299б |
| _Going-3D-2015.PNG |
884б |
| _Interface and Navigation model_2013.SLDPRT |
299б |
| _Know Active Relations_2013.SLDPRT |
299б |
| 1. Congratulations! We are done with this course!.mp4 |
21.63Мб |
| 1. Congratulations! We are done with this course!-en_US.srt |
951б |
| 1. Congratulations! We are done with this course!-es_ES.srt |
988б |
| 1. Congratulations! We are done with this course!-id_ID.srt |
972б |
| 1. Congratulations! We are done with this course!-it_IT.srt |
1008б |
| 1. Congratulations! We are done with this course!-pl_PL.srt |
951б |
| 1. Congratulations! We are done with this course!-pt_BR.srt |
989б |
| 1. Congratulations! We are done with this course!-ro_RO.srt |
1.03Кб |
| 1. Congratulations! We are done with this course!-th_TH.srt |
1.61Кб |
| 1. What is in this section! Basic SOLIDWORKS Interface and Navigation.mp4 |
19.87Мб |
| 1. What is in this section! Basic SOLIDWORKS Interface and Navigation-en_US.srt |
988б |
| 1. What is in this section! Basic SOLIDWORKS Interface and Navigation-es_ES.srt |
991б |
| 1. What is in this section! Basic SOLIDWORKS Interface and Navigation-id_ID.srt |
1001б |
| 1. What is in this section! Basic SOLIDWORKS Interface and Navigation-it_IT.srt |
983б |
| 1. What is in this section! Basic SOLIDWORKS Interface and Navigation-pl_PL.srt |
1001б |
| 1. What is in this section! Basic SOLIDWORKS Interface and Navigation-pt_BR.srt |
1003б |
| 1. What is in this section! Basic SOLIDWORKS Interface and Navigation-ro_RO.srt |
1.06Кб |
| 1. What is in this section! Basic SOLIDWORKS Interface and Navigation-th_TH.srt |
1.55Кб |
| 1. What is in This Section! Lets Start Applying Basic Features!.mp4 |
21.47Мб |
| 1. What is in This Section! Lets Start Applying Basic Features!-en_US.srt |
910б |
| 1. What is in This Section! Lets Start Applying Basic Features!-es_ES.srt |
984б |
| 1. What is in This Section! Lets Start Applying Basic Features!-id_ID.srt |
978б |
| 1. What is in This Section! Lets Start Applying Basic Features!-it_IT.srt |
965б |
| 1. What is in This Section! Lets Start Applying Basic Features!-pl_PL.srt |
940б |
| 1. What is in This Section! Lets Start Applying Basic Features!-pt_BR.srt |
925б |
| 1. What is in This Section! Lets Start Applying Basic Features!-ro_RO.srt |
991б |
| 1. What is in This Section! Lets Start Applying Basic Features!-th_TH.srt |
1.69Кб |
| 1. What is in this Section! Lets Start Sketching.mp4 |
18.85Мб |
| 1. What is in this Section! Lets Start Sketching-en_US.srt |
868б |
| 1. What is in this Section! Lets Start Sketching-es_ES.srt |
894б |
| 1. What is in this Section! Lets Start Sketching-id_ID.srt |
952б |
| 1. What is in this Section! Lets Start Sketching-it_IT.srt |
897б |
| 1. What is in this Section! Lets Start Sketching-pl_PL.srt |
907б |
| 1. What is in this Section! Lets Start Sketching-pt_BR.srt |
930б |
| 1. What is in this Section! Lets Start Sketching-ro_RO.srt |
957б |
| 1. What is in this Section! Lets Start Sketching-th_TH.srt |
1.64Кб |
| 1. What is this Course all about!!.mp4 |
34.92Мб |
| 1. What is this Course all about!!-en_US.srt |
2.09Кб |
| 1. What is this Course all about!!-es_ES.srt |
2.19Кб |
| 1. What is this Course all about!!-id_ID.srt |
2.26Кб |
| 1. What is this Course all about!!-it_IT.srt |
2.19Кб |
| 1. What is this Course all about!!-pl_PL.srt |
2.23Кб |
| 1. What is this Course all about!!-pt_BR.srt |
2.21Кб |
| 1. What is this Course all about!!-ro_RO.srt |
2.21Кб |
| 1. What is this Course all about!!-th_TH.srt |
3.88Кб |
| 1. What is this Section! Let's Start Applying more Complex Features.mp4 |
17.23Мб |
| 1. What is this Section! Let's Start Applying more Complex Features-en_US.srt |
813б |
| 1. What is this Section! Let's Start Applying more Complex Features-es_ES.srt |
906б |
| 1. What is this Section! Let's Start Applying more Complex Features-id_ID.srt |
902б |
| 1. What is this Section! Let's Start Applying more Complex Features-it_IT.srt |
881б |
| 1. What is this Section! Let's Start Applying more Complex Features-pl_PL.srt |
909б |
| 1. What is this Section! Let's Start Applying more Complex Features-pt_BR.srt |
877б |
| 1. What is this Section! Let's Start Applying more Complex Features-ro_RO.srt |
950б |
| 1. What is this Section! Let's Start Applying more Complex Features-th_TH.srt |
1.79Кб |
| 1. What is this Section Let's Explore Material and Mass Properties.mp4 |
15.49Мб |
| 1. What is this Section Let's Explore Material and Mass Properties-en_US.srt |
784б |
| 1. What is this Section Let's Explore Material and Mass Properties-es_ES.srt |
749б |
| 1. What is this Section Let's Explore Material and Mass Properties-id_ID.srt |
737б |
| 1. What is this Section Let's Explore Material and Mass Properties-it_IT.srt |
740б |
| 1. What is this Section Let's Explore Material and Mass Properties-pl_PL.srt |
765б |
| 1. What is this Section Let's Explore Material and Mass Properties-pt_BR.srt |
725б |
| 1. What is this Section Let's Explore Material and Mass Properties-ro_RO.srt |
819б |
| 1. What is this Section Let's Explore Material and Mass Properties-th_TH.srt |
1.27Кб |
| 1. What is this Section Let's Start doing 2D Drawings.mp4 |
21.00Мб |
| 1. What is this Section Let's Start doing 2D Drawings-en_US.srt |
1015б |
| 1. What is this Section Let's Start doing 2D Drawings-es_ES.srt |
1.12Кб |
| 1. What is this Section Let's Start doing 2D Drawings-id_ID.srt |
1.06Кб |
| 1. What is this Section Let's Start doing 2D Drawings-it_IT.srt |
1.07Кб |
| 1. What is this Section Let's Start doing 2D Drawings-pl_PL.srt |
1.07Кб |
| 1. What is this Section Let's Start doing 2D Drawings-pt_BR.srt |
1.08Кб |
| 1. What is this Section Let's Start doing 2D Drawings-ro_RO.srt |
1.16Кб |
| 1. What is this Section Let's Start doing 2D Drawings-th_TH.srt |
1.83Кб |
| 1. What is this Section Let's start doing Assemblies.mp4 |
23.94Мб |
| 1. What is this Section Let's start doing Assemblies-en_US.srt |
1.02Кб |
| 1. What is this Section Let's start doing Assemblies-es_ES.srt |
1.18Кб |
| 1. What is this Section Let's start doing Assemblies-id_ID.srt |
1.14Кб |
| 1. What is this Section Let's start doing Assemblies-it_IT.srt |
1.09Кб |
| 1. What is this Section Let's start doing Assemblies-pl_PL.srt |
1.09Кб |
| 1. What is this Section Let's start doing Assemblies-pt_BR.srt |
1.11Кб |
| 1. What is this Section Let's start doing Assemblies-ro_RO.srt |
1.14Кб |
| 1. What is this Section Let's start doing Assemblies-th_TH.srt |
2.06Кб |
| 10. Reference Geometries Coordinate System.mp4 |
54.28Мб |
| 10. Reference Geometries Coordinate System-en_US.srt |
3.96Кб |
| 10. Reference Geometries Coordinate System-es_ES.srt |
4.18Кб |
| 10. Reference Geometries Coordinate System-id_ID.srt |
4.10Кб |
| 10. Reference Geometries Coordinate System-it_IT.srt |
4.05Кб |
| 10. Reference Geometries Coordinate System-pl_PL.srt |
4.00Кб |
| 10. Reference Geometries Coordinate System-pt_BR.srt |
4.13Кб |
| 10. Reference Geometries Coordinate System-ro_RO.srt |
4.26Кб |
| 10. Reference Geometries Coordinate System-th_TH.srt |
6.90Кб |
| 10. SOLIDWORKS Applying Relations Automatically!! How does that work!.mp4 |
48.31Мб |
| 10. SOLIDWORKS Applying Relations Automatically!! How does that work!-en_US.srt |
4.05Кб |
| 10. SOLIDWORKS Applying Relations Automatically!! How does that work!-es_ES.srt |
4.08Кб |
| 10. SOLIDWORKS Applying Relations Automatically!! How does that work!-id_ID.srt |
4.21Кб |
| 10. SOLIDWORKS Applying Relations Automatically!! How does that work!-it_IT.srt |
4.01Кб |
| 10. SOLIDWORKS Applying Relations Automatically!! How does that work!-pl_PL.srt |
4.04Кб |
| 10. SOLIDWORKS Applying Relations Automatically!! How does that work!-pt_BR.srt |
4.07Кб |
| 10. SOLIDWORKS Applying Relations Automatically!! How does that work!-ro_RO.srt |
4.15Кб |
| 10. SOLIDWORKS Applying Relations Automatically!! How does that work!-th_TH.srt |
7.24Кб |
| 11. Knowing and Deleting Active Relations.mp4 |
29.78Мб |
| 11. Knowing and Deleting Active Relations-en_US.srt |
2.56Кб |
| 11. Knowing and Deleting Active Relations-es_ES.srt |
2.61Кб |
| 11. Knowing and Deleting Active Relations-id_ID.srt |
2.62Кб |
| 11. Knowing and Deleting Active Relations-it_IT.srt |
2.64Кб |
| 11. Knowing and Deleting Active Relations-pl_PL.srt |
2.61Кб |
| 11. Knowing and Deleting Active Relations-pt_BR.srt |
2.67Кб |
| 11. Knowing and Deleting Active Relations-ro_RO.srt |
2.75Кб |
| 11. Knowing and Deleting Active Relations-th_TH.srt |
4.75Кб |
| 11. PRACTICE!! Let's Assemble something using Standard Mates.mp4 |
160.60Мб |
| 11. PRACTICE!! Let's Assemble something using Standard Mates-en_US.srt |
7.52Кб |
| 11. PRACTICE!! Let's Assemble something using Standard Mates-es_ES.srt |
8.01Кб |
| 11. PRACTICE!! Let's Assemble something using Standard Mates-id_ID.srt |
8.15Кб |
| 11. PRACTICE!! Let's Assemble something using Standard Mates-it_IT.srt |
7.82Кб |
| 11. PRACTICE!! Let's Assemble something using Standard Mates-pl_PL.srt |
7.82Кб |
| 11. PRACTICE!! Let's Assemble something using Standard Mates-pt_BR.srt |
7.88Кб |
| 11. PRACTICE!! Let's Assemble something using Standard Mates-ro_RO.srt |
8.06Кб |
| 11. PRACTICE!! Let's Assemble something using Standard Mates-th_TH.srt |
13.64Кб |
| 12. Additional Lines Construction Lines and Center Lines.mp4 |
36.14Мб |
| 12. Additional Lines Construction Lines and Center Lines-en_US.srt |
2.99Кб |
| 12. Additional Lines Construction Lines and Center Lines-es_ES.srt |
3.15Кб |
| 12. Additional Lines Construction Lines and Center Lines-id_ID.srt |
3.13Кб |
| 12. Additional Lines Construction Lines and Center Lines-it_IT.srt |
3.03Кб |
| 12. Additional Lines Construction Lines and Center Lines-pl_PL.srt |
2.89Кб |
| 12. Additional Lines Construction Lines and Center Lines-pt_BR.srt |
3.13Кб |
| 12. Additional Lines Construction Lines and Center Lines-ro_RO.srt |
3.12Кб |
| 12. Additional Lines Construction Lines and Center Lines-th_TH.srt |
5.54Кб |
| 13. More Sketch Commands Mirror, Offset, Patterns and Trim.mp4 |
90.57Мб |
| 13. More Sketch Commands Mirror, Offset, Patterns and Trim-en_US.srt |
7.84Кб |
| 13. More Sketch Commands Mirror, Offset, Patterns and Trim-es_ES.srt |
7.85Кб |
| 13. More Sketch Commands Mirror, Offset, Patterns and Trim-id_ID.srt |
7.93Кб |
| 13. More Sketch Commands Mirror, Offset, Patterns and Trim-it_IT.srt |
7.71Кб |
| 13. More Sketch Commands Mirror, Offset, Patterns and Trim-pl_PL.srt |
7.60Кб |
| 13. More Sketch Commands Mirror, Offset, Patterns and Trim-pt_BR.srt |
7.80Кб |
| 13. More Sketch Commands Mirror, Offset, Patterns and Trim-ro_RO.srt |
7.91Кб |
| 13. More Sketch Commands Mirror, Offset, Patterns and Trim-th_TH.srt |
13.63Кб |
| 14. Teaser to the next Section GOING 3D.mp4 |
16.01Мб |
| 14. Teaser to the next Section GOING 3D-en_US.srt |
1.07Кб |
| 14. Teaser to the next Section GOING 3D-es_ES.srt |
1.08Кб |
| 14. Teaser to the next Section GOING 3D-id_ID.srt |
1.08Кб |
| 14. Teaser to the next Section GOING 3D-it_IT.srt |
1.10Кб |
| 14. Teaser to the next Section GOING 3D-pl_PL.srt |
1.07Кб |
| 14. Teaser to the next Section GOING 3D-pt_BR.srt |
1.08Кб |
| 14. Teaser to the next Section GOING 3D-ro_RO.srt |
1.12Кб |
| 14. Teaser to the next Section GOING 3D-th_TH.srt |
1.82Кб |
| 2. How to Study this course! In a Udemy-Technical-Sense !!.mp4 |
4.47Мб |
| 2. How to Study this course! In a Udemy-Technical-Sense !!-en_US.srt |
0б |
| 2. How to Study this course! In a Udemy-Technical-Sense !!-es_ES.srt |
116б |
| 2. How to Study this course! In a Udemy-Technical-Sense !!-id_ID.srt |
59б |
| 2. How to Study this course! In a Udemy-Technical-Sense !!-it_IT.srt |
48б |
| 2. How to Study this course! In a Udemy-Technical-Sense !!-pl_PL.srt |
55б |
| 2. How to Study this course! In a Udemy-Technical-Sense !!-pt_BR.srt |
114б |
| 2. How to Study this course! In a Udemy-Technical-Sense !!-ro_RO.srt |
54б |
| 2. How to Study this course! In a Udemy-Technical-Sense !!-th_TH.srt |
73б |
| 2. Opening a Drawing File.mp4 |
48.59Мб |
| 2. Opening a Drawing File-en_US.srt |
3.61Кб |
| 2. Opening a Drawing File-es_ES.srt |
3.85Кб |
| 2. Opening a Drawing File-id_ID.srt |
4.05Кб |
| 2. Opening a Drawing File-it_IT.srt |
3.87Кб |
| 2. Opening a Drawing File-pl_PL.srt |
3.69Кб |
| 2. Opening a Drawing File-pt_BR.srt |
3.91Кб |
| 2. Opening a Drawing File-ro_RO.srt |
3.92Кб |
| 2. Opening a Drawing File-th_TH.srt |
6.59Кб |
| 2. Opening an Assembly File.mp4 |
57.56Мб |
| 2. Opening an Assembly File-en_US.srt |
3.67Кб |
| 2. Opening an Assembly File-es_ES.srt |
3.88Кб |
| 2. Opening an Assembly File-id_ID.srt |
4.17Кб |
| 2. Opening an Assembly File-it_IT.srt |
3.89Кб |
| 2. Opening an Assembly File-pl_PL.srt |
4.02Кб |
| 2. Opening an Assembly File-pt_BR.srt |
3.97Кб |
| 2. Opening an Assembly File-ro_RO.srt |
4.14Кб |
| 2. Opening an Assembly File-th_TH.srt |
6.83Кб |
| 2. Our First Features Extrude Boss, Cut Extrude, and Fillet.mp4 |
109.12Мб |
| 2. Our First Features Extrude Boss, Cut Extrude, and Fillet-en_US.srt |
10.02Кб |
| 2. Our First Features Extrude Boss, Cut Extrude, and Fillet-es_ES.srt |
10.59Кб |
| 2. Our First Features Extrude Boss, Cut Extrude, and Fillet-it_IT.srt |
10.45Кб |
| 2. Our First Features Extrude Boss, Cut Extrude, and Fillet-pl_PL.srt |
10.27Кб |
| 2. Our First Features Extrude Boss, Cut Extrude, and Fillet-pt_BR.srt |
10.43Кб |
| 2. Select a Plane to Sketch on.mp4 |
20.97Мб |
| 2. Select a Plane to Sketch on-en_US.srt |
2.39Кб |
| 2. Select a Plane to Sketch on-es_ES.srt |
2.54Кб |
| 2. Select a Plane to Sketch on-id_ID.srt |
2.53Кб |
| 2. Select a Plane to Sketch on-it_IT.srt |
2.54Кб |
| 2. Select a Plane to Sketch on-pl_PL.srt |
2.58Кб |
| 2. Select a Plane to Sketch on-pt_BR.srt |
2.52Кб |
| 2. Select a Plane to Sketch on-ro_RO.srt |
2.63Кб |
| 2. Select a Plane to Sketch on-th_TH.srt |
4.41Кб |
| 2. Selecting Materials for Your Parts.mp4 |
48.92Мб |
| 2. Selecting Materials for Your Parts-en_US.srt |
2.93Кб |
| 2. Selecting Materials for Your Parts-es_ES.srt |
3.11Кб |
| 2. Selecting Materials for Your Parts-id_ID.srt |
2.93Кб |
| 2. Selecting Materials for Your Parts-it_IT.srt |
3.06Кб |
| 2. Selecting Materials for Your Parts-pl_PL.srt |
3.05Кб |
| 2. Selecting Materials for Your Parts-pt_BR.srt |
3.13Кб |
| 2. Selecting Materials for Your Parts-ro_RO.srt |
3.25Кб |
| 2. Selecting Materials for Your Parts-th_TH.srt |
5.06Кб |
| 2. Starting a New Part.mp4 |
6.99Мб |
| 2. Starting a New Part-en_US.srt |
730б |
| 2. Starting a New Part-es_ES.srt |
761б |
| 2. Starting a New Part-id_ID.srt |
799б |
| 2. Starting a New Part-it_IT.srt |
772б |
| 2. Starting a New Part-pl_PL.srt |
724б |
| 2. Starting a New Part-pt_BR.srt |
780б |
| 2. Starting a New Part-ro_RO.srt |
849б |
| 2. Starting a New Part-th_TH.srt |
1.39Кб |
| 2. The Features Revolved Boss and Revolved Cut!.mp4 |
155.76Мб |
| 2. The Features Revolved Boss and Revolved Cut!-en_US.srt |
12.00Кб |
| 2. The Features Revolved Boss and Revolved Cut!-es_ES.srt |
12.54Кб |
| 2. The Features Revolved Boss and Revolved Cut!-id_ID.srt |
12.21Кб |
| 2. The Features Revolved Boss and Revolved Cut!-it_IT.srt |
12.02Кб |
| 2. The Features Revolved Boss and Revolved Cut!-pl_PL.srt |
11.84Кб |
| 2. The Features Revolved Boss and Revolved Cut!-pt_BR.srt |
11.98Кб |
| 2. The Features Revolved Boss and Revolved Cut!-ro_RO.srt |
12.31Кб |
| 2. The Features Revolved Boss and Revolved Cut!-th_TH.srt |
21.61Кб |
| 3. Adjusting Measurement Units' System in a Drawing File.mp4 |
4.90Мб |
| 3. Adjusting Measurement Units' System in a Drawing File-en_US.srt |
1.48Кб |
| 3. Adjusting Measurement Units' System in a Drawing File-es_ES.srt |
1.48Кб |
| 3. Adjusting Measurement Units' System in a Drawing File-id_ID.srt |
1.47Кб |
| 3. Adjusting Measurement Units' System in a Drawing File-it_IT.srt |
1.47Кб |
| 3. Adjusting Measurement Units' System in a Drawing File-pl_PL.srt |
1.46Кб |
| 3. Adjusting Measurement Units' System in a Drawing File-pt_BR.srt |
1.50Кб |
| 3. Adjusting Measurement Units' System in a Drawing File-ro_RO.srt |
1.56Кб |
| 3. Adjusting Measurement Units' System in a Drawing File-th_TH.srt |
2.46Кб |
| 3. Know about the Command Bar, Canvas and Design Tree.mp4 |
19.95Мб |
| 3. Know about the Command Bar, Canvas and Design Tree-en_US.srt |
1.52Кб |
| 3. Know about the Command Bar, Canvas and Design Tree-es_ES.srt |
1.51Кб |
| 3. Know about the Command Bar, Canvas and Design Tree-id_ID.srt |
1.52Кб |
| 3. Know about the Command Bar, Canvas and Design Tree-it_IT.srt |
1.50Кб |
| 3. Know about the Command Bar, Canvas and Design Tree-pl_PL.srt |
1.43Кб |
| 3. Know about the Command Bar, Canvas and Design Tree-pt_BR.srt |
1.54Кб |
| 3. Know about the Command Bar, Canvas and Design Tree-ro_RO.srt |
1.59Кб |
| 3. Know about the Command Bar, Canvas and Design Tree-th_TH.srt |
2.80Кб |
| 3. Let us Edit and Delete Features.mp4 |
73.34Мб |
| 3. Let us Edit and Delete Features-en_US.srt |
5.43Кб |
| 3. Let us Edit and Delete Features-es_ES.srt |
5.50Кб |
| 3. Let us Edit and Delete Features-id_ID.srt |
5.27Кб |
| 3. Let us Edit and Delete Features-it_IT.srt |
5.53Кб |
| 3. Let us Edit and Delete Features-pl_PL.srt |
5.34Кб |
| 3. Let us Edit and Delete Features-pt_BR.srt |
5.34Кб |
| 3. Let us Edit and Delete Features-ro_RO.srt |
5.60Кб |
| 3. Let us Edit and Delete Features-th_TH.srt |
9.42Кб |
| 3. The Features Swept Boss and Swept Cut.mp4 |
109.60Мб |
| 3. The Features Swept Boss and Swept Cut-en_US.srt |
7.08Кб |
| 3. The Features Swept Boss and Swept Cut-es_ES.srt |
7.70Кб |
| 3. The Features Swept Boss and Swept Cut-id_ID.srt |
7.62Кб |
| 3. The Features Swept Boss and Swept Cut-it_IT.srt |
7.65Кб |
| 3. The Features Swept Boss and Swept Cut-pl_PL.srt |
7.59Кб |
| 3. The Features Swept Boss and Swept Cut-pt_BR.srt |
7.50Кб |
| 3. The Features Swept Boss and Swept Cut-ro_RO.srt |
7.74Кб |
| 3. The Features Swept Boss and Swept Cut-th_TH.srt |
12.70Кб |
| 3. Types of Mates in SOLIDWORKS Standard, Advanced and Mechanical.mp4 |
30.18Мб |
| 3. Types of Mates in SOLIDWORKS Standard, Advanced and Mechanical-en_US.srt |
1.78Кб |
| 3. Types of Mates in SOLIDWORKS Standard, Advanced and Mechanical-es_ES.srt |
2.07Кб |
| 3. Types of Mates in SOLIDWORKS Standard, Advanced and Mechanical-id_ID.srt |
1.96Кб |
| 3. Types of Mates in SOLIDWORKS Standard, Advanced and Mechanical-it_IT.srt |
1.91Кб |
| 3. Types of Mates in SOLIDWORKS Standard, Advanced and Mechanical-pl_PL.srt |
1.93Кб |
| 3. Types of Mates in SOLIDWORKS Standard, Advanced and Mechanical-pt_BR.srt |
1.87Кб |
| 3. Types of Mates in SOLIDWORKS Standard, Advanced and Mechanical-ro_RO.srt |
1.96Кб |
| 3. Types of Mates in SOLIDWORKS Standard, Advanced and Mechanical-th_TH.srt |
3.25Кб |
| 3. Viewing Mass Properties.mp4 |
43.26Мб |
| 3. Viewing Mass Properties-en_US.srt |
2.93Кб |
| 3. Viewing Mass Properties-es_ES.srt |
2.93Кб |
| 3. Viewing Mass Properties-id_ID.srt |
2.90Кб |
| 3. Viewing Mass Properties-it_IT.srt |
2.91Кб |
| 3. Viewing Mass Properties-pl_PL.srt |
2.89Кб |
| 3. Viewing Mass Properties-pt_BR.srt |
2.91Кб |
| 3. Viewing Mass Properties-ro_RO.srt |
3.11Кб |
| 3. Viewing Mass Properties-th_TH.srt |
5.26Кб |
| 3. WATCH OUT!! Always Link your Sketches to the Origin.mp4 |
8.66Мб |
| 3. WATCH OUT!! Always Link your Sketches to the Origin-en_US.srt |
648б |
| 3. WATCH OUT!! Always Link your Sketches to the Origin-es_ES.srt |
718б |
| 3. WATCH OUT!! Always Link your Sketches to the Origin-id_ID.srt |
737б |
| 3. WATCH OUT!! Always Link your Sketches to the Origin-it_IT.srt |
735б |
| 3. WATCH OUT!! Always Link your Sketches to the Origin-pl_PL.srt |
738б |
| 3. WATCH OUT!! Always Link your Sketches to the Origin-pt_BR.srt |
713б |
| 3. WATCH OUT!! Always Link your Sketches to the Origin-ro_RO.srt |
739б |
| 3. WATCH OUT!! Always Link your Sketches to the Origin-th_TH.srt |
1.29Кб |
| 4. Adjusting the Document's Measurement Units.mp4 |
13.95Мб |
| 4. Adjusting the Document's Measurement Units-en_US.srt |
1.10Кб |
| 4. Adjusting the Document's Measurement Units-es_ES.srt |
1.11Кб |
| 4. Adjusting the Document's Measurement Units-id_ID.srt |
1.11Кб |
| 4. Adjusting the Document's Measurement Units-it_IT.srt |
1.13Кб |
| 4. Adjusting the Document's Measurement Units-pl_PL.srt |
1.12Кб |
| 4. Adjusting the Document's Measurement Units-pt_BR.srt |
1.15Кб |
| 4. Adjusting the Document's Measurement Units-ro_RO.srt |
1.22Кб |
| 4. Adjusting the Document's Measurement Units-th_TH.srt |
2.02Кб |
| 4. A Point in Adding Parts _ Base Fixed Part.mp4 |
30.15Мб |
| 4. A Point in Adding Parts _ Base Fixed Part-en_US.srt |
1.80Кб |
| 4. A Point in Adding Parts _ Base Fixed Part-es_ES.srt |
1.92Кб |
| 4. A Point in Adding Parts _ Base Fixed Part-id_ID.srt |
2.08Кб |
| 4. A Point in Adding Parts _ Base Fixed Part-it_IT.srt |
1.94Кб |
| 4. A Point in Adding Parts _ Base Fixed Part-pl_PL.srt |
1.97Кб |
| 4. A Point in Adding Parts _ Base Fixed Part-pt_BR.srt |
2.01Кб |
| 4. A Point in Adding Parts _ Base Fixed Part-ro_RO.srt |
2.08Кб |
| 4. A Point in Adding Parts _ Base Fixed Part-th_TH.srt |
3.53Кб |
| 4. Creating Standard Orthographic Views from a Part.mp4 |
46.79Мб |
| 4. Creating Standard Orthographic Views from a Part-en_US.srt |
3.55Кб |
| 4. Creating Standard Orthographic Views from a Part-es_ES.srt |
3.56Кб |
| 4. Creating Standard Orthographic Views from a Part-id_ID.srt |
3.72Кб |
| 4. Creating Standard Orthographic Views from a Part-it_IT.srt |
3.47Кб |
| 4. Creating Standard Orthographic Views from a Part-pl_PL.srt |
3.39Кб |
| 4. Creating Standard Orthographic Views from a Part-pt_BR.srt |
3.47Кб |
| 4. Creating Standard Orthographic Views from a Part-ro_RO.srt |
3.73Кб |
| 4. Creating Standard Orthographic Views from a Part-th_TH.srt |
6.29Кб |
| 4. Let us do Chamfers now.mp4 |
73.71Мб |
| 4. Let us do Chamfers now-en_US.srt |
6.48Кб |
| 4. Let us do Chamfers now-es_ES.srt |
6.48Кб |
| 4. Let us do Chamfers now-it_IT.srt |
6.36Кб |
| 4. Let us do Chamfers now-pl_PL.srt |
6.19Кб |
| 4. Let us do Chamfers now-pt_BR.srt |
6.52Кб |
| 4. Reference Geometries Making new Planes other than Base Planes and faces!.mp4 |
191.11Мб |
| 4. Reference Geometries Making new Planes other than Base Planes and faces!-en_US.srt |
12.54Кб |
| 4. Reference Geometries Making new Planes other than Base Planes and faces!-es_ES.srt |
13.04Кб |
| 4. Reference Geometries Making new Planes other than Base Planes and faces!-id_ID.srt |
13.44Кб |
| 4. Reference Geometries Making new Planes other than Base Planes and faces!-it_IT.srt |
12.96Кб |
| 4. Reference Geometries Making new Planes other than Base Planes and faces!-pl_PL.srt |
13.20Кб |
| 4. Reference Geometries Making new Planes other than Base Planes and faces!-pt_BR.srt |
13.03Кб |
| 4. Reference Geometries Making new Planes other than Base Planes and faces!-ro_RO.srt |
13.67Кб |
| 4. Reference Geometries Making new Planes other than Base Planes and faces!-th_TH.srt |
21.50Кб |
| 4. Sketching Basic Shapes Part 1 - Rectangles and Lines.mp4 |
49.94Мб |
| 4. Sketching Basic Shapes Part 1 - Rectangles and Lines-en_US.srt |
4.40Кб |
| 4. Sketching Basic Shapes Part 1 - Rectangles and Lines-es_ES.srt |
4.88Кб |
| 4. Sketching Basic Shapes Part 1 - Rectangles and Lines-id_ID.srt |
4.95Кб |
| 4. Sketching Basic Shapes Part 1 - Rectangles and Lines-it_IT.srt |
4.75Кб |
| 4. Sketching Basic Shapes Part 1 - Rectangles and Lines-pl_PL.srt |
4.71Кб |
| 4. Sketching Basic Shapes Part 1 - Rectangles and Lines-pt_BR.srt |
4.81Кб |
| 4. Sketching Basic Shapes Part 1 - Rectangles and Lines-ro_RO.srt |
4.96Кб |
| 4. Sketching Basic Shapes Part 1 - Rectangles and Lines-th_TH.srt |
8.73Кб |
| 5. How to Change the Drawing Scale.mp4 |
29.20Мб |
| 5. How to Change the Drawing Scale-en_US.srt |
2.20Кб |
| 5. How to Change the Drawing Scale-es_ES.srt |
2.25Кб |
| 5. How to Change the Drawing Scale-id_ID.srt |
2.39Кб |
| 5. How to Change the Drawing Scale-it_IT.srt |
2.29Кб |
| 5. How to Change the Drawing Scale-pl_PL.srt |
2.27Кб |
| 5. How to Change the Drawing Scale-pt_BR.srt |
2.31Кб |
| 5. How to Change the Drawing Scale-ro_RO.srt |
2.35Кб |
| 5. How to Change the Drawing Scale-th_TH.srt |
4.18Кб |
| 5. Let us Practice our First Features!.mp4 |
125.47Мб |
| 5. Let us Practice our First Features!-en_US.srt |
8.89Кб |
| 5. Let us Practice our First Features!-es_ES.srt |
9.61Кб |
| 5. Let us Practice our First Features!-id_ID.srt |
9.42Кб |
| 5. Let us Practice our First Features!-it_IT.srt |
9.29Кб |
| 5. Let us Practice our First Features!-pl_PL.srt |
9.23Кб |
| 5. Let us Practice our First Features!-pt_BR.srt |
9.40Кб |
| 5. Let us Practice our First Features!-ro_RO.srt |
9.52Кб |
| 5. Let us Practice our First Features!-th_TH.srt |
15.52Кб |
| 5. Sketching Basic Shapes Part 2 - Circles, Arcs and Ellipses.mp4 |
67.99Мб |
| 5. Sketching Basic Shapes Part 2 - Circles, Arcs and Ellipses-en_US.srt |
5.36Кб |
| 5. Sketching Basic Shapes Part 2 - Circles, Arcs and Ellipses-es_ES.srt |
5.80Кб |
| 5. Sketching Basic Shapes Part 2 - Circles, Arcs and Ellipses-id_ID.srt |
5.66Кб |
| 5. Sketching Basic Shapes Part 2 - Circles, Arcs and Ellipses-it_IT.srt |
5.80Кб |
| 5. Sketching Basic Shapes Part 2 - Circles, Arcs and Ellipses-pl_PL.srt |
5.59Кб |
| 5. Sketching Basic Shapes Part 2 - Circles, Arcs and Ellipses-pt_BR.srt |
5.78Кб |
| 5. Sketching Basic Shapes Part 2 - Circles, Arcs and Ellipses-ro_RO.srt |
5.80Кб |
| 5. Sketching Basic Shapes Part 2 - Circles, Arcs and Ellipses-th_TH.srt |
10.12Кб |
| 5. The Features Lofted Boss and Lofted Cut.mp4 |
212.00Мб |
| 5. The Features Lofted Boss and Lofted Cut-en_US.srt |
13.00Кб |
| 5. The Features Lofted Boss and Lofted Cut-es_ES.srt |
13.78Кб |
| 5. The Features Lofted Boss and Lofted Cut-id_ID.srt |
13.55Кб |
| 5. The Features Lofted Boss and Lofted Cut-it_IT.srt |
13.32Кб |
| 5. The Features Lofted Boss and Lofted Cut-pl_PL.srt |
13.20Кб |
| 5. The Features Lofted Boss and Lofted Cut-pt_BR.srt |
13.39Кб |
| 5. The Features Lofted Boss and Lofted Cut-ro_RO.srt |
13.81Кб |
| 5. The Features Lofted Boss and Lofted Cut-th_TH.srt |
23.78Кб |
| 5. The Standard Mates Coincident, Parallel, and Perpendicular.mp4 |
125.37Мб |
| 5. The Standard Mates Coincident, Parallel, and Perpendicular-en_US.srt |
8.09Кб |
| 5. The Standard Mates Coincident, Parallel, and Perpendicular-es_ES.srt |
8.40Кб |
| 5. The Standard Mates Coincident, Parallel, and Perpendicular-id_ID.srt |
8.27Кб |
| 5. The Standard Mates Coincident, Parallel, and Perpendicular-it_IT.srt |
8.03Кб |
| 5. The Standard Mates Coincident, Parallel, and Perpendicular-pl_PL.srt |
8.01Кб |
| 5. The Standard Mates Coincident, Parallel, and Perpendicular-pt_BR.srt |
8.12Кб |
| 5. The Standard Mates Coincident, Parallel, and Perpendicular-ro_RO.srt |
8.50Кб |
| 5. The Standard Mates Coincident, Parallel, and Perpendicular-th_TH.srt |
14.45Кб |
| 5. Utilizing the Mouse for More Efficient Models Control and Creation.mp4 |
24.24Мб |
| 5. Utilizing the Mouse for More Efficient Models Control and Creation-en_US.srt |
1.60Кб |
| 5. Utilizing the Mouse for More Efficient Models Control and Creation-es_ES.srt |
1.74Кб |
| 5. Utilizing the Mouse for More Efficient Models Control and Creation-id_ID.srt |
1.68Кб |
| 5. Utilizing the Mouse for More Efficient Models Control and Creation-it_IT.srt |
1.67Кб |
| 5. Utilizing the Mouse for More Efficient Models Control and Creation-pl_PL.srt |
1.58Кб |
| 5. Utilizing the Mouse for More Efficient Models Control and Creation-pt_BR.srt |
1.58Кб |
| 5. Utilizing the Mouse for More Efficient Models Control and Creation-ro_RO.srt |
1.71Кб |
| 5. Utilizing the Mouse for More Efficient Models Control and Creation-th_TH.srt |
2.90Кб |
| 6. Communicate your Drawings Dimensions, Holes, Centerlines and Display Style.mp4 |
117.45Мб |
| 6. Communicate your Drawings Dimensions, Holes, Centerlines and Display Style-en_US.srt |
8.14Кб |
| 6. Communicate your Drawings Dimensions, Holes, Centerlines and Display Style-es_ES.srt |
8.42Кб |
| 6. Communicate your Drawings Dimensions, Holes, Centerlines and Display Style-id_ID.srt |
8.57Кб |
| 6. Communicate your Drawings Dimensions, Holes, Centerlines and Display Style-it_IT.srt |
8.48Кб |
| 6. Communicate your Drawings Dimensions, Holes, Centerlines and Display Style-pl_PL.srt |
8.17Кб |
| 6. Communicate your Drawings Dimensions, Holes, Centerlines and Display Style-pt_BR.srt |
8.50Кб |
| 6. Communicate your Drawings Dimensions, Holes, Centerlines and Display Style-ro_RO.srt |
8.55Кб |
| 6. Communicate your Drawings Dimensions, Holes, Centerlines and Display Style-th_TH.srt |
14.09Кб |
| 6. Design Priorities_ A point in Design Intent.mp4 |
94.56Мб |
| 6. Design Priorities_ A point in Design Intent-en_US.srt |
7.07Кб |
| 6. Design Priorities_ A point in Design Intent-es_ES.srt |
7.11Кб |
| 6. Design Priorities_ A point in Design Intent-id_ID.srt |
7.04Кб |
| 6. Design Priorities_ A point in Design Intent-it_IT.srt |
7.00Кб |
| 6. Design Priorities_ A point in Design Intent-pl_PL.srt |
6.83Кб |
| 6. Design Priorities_ A point in Design Intent-pt_BR.srt |
7.02Кб |
| 6. Design Priorities_ A point in Design Intent-ro_RO.srt |
7.10Кб |
| 6. Design Priorities_ A point in Design Intent-th_TH.srt |
11.67Кб |
| 6. PRACTICE!! Let's Model Something that uses some of those Complex Features!.mp4 |
235.75Мб |
| 6. PRACTICE!! Let's Model Something that uses some of those Complex Features!-en_US.srt |
14.19Кб |
| 6. PRACTICE!! Let's Model Something that uses some of those Complex Features!-es_ES.srt |
14.82Кб |
| 6. PRACTICE!! Let's Model Something that uses some of those Complex Features!-id_ID.srt |
14.88Кб |
| 6. PRACTICE!! Let's Model Something that uses some of those Complex Features!-it_IT.srt |
14.88Кб |
| 6. PRACTICE!! Let's Model Something that uses some of those Complex Features!-pl_PL.srt |
14.47Кб |
| 6. PRACTICE!! Let's Model Something that uses some of those Complex Features!-pt_BR.srt |
14.66Кб |
| 6. PRACTICE!! Let's Model Something that uses some of those Complex Features!-ro_RO.srt |
15.16Кб |
| 6. PRACTICE!! Let's Model Something that uses some of those Complex Features!-th_TH.srt |
24.20Кб |
| 6. The Standard Mates Tangent and Concentric.mp4 |
100.45Мб |
| 6. The Standard Mates Tangent and Concentric-en_US.srt |
5.81Кб |
| 6. The Standard Mates Tangent and Concentric-es_ES.srt |
6.17Кб |
| 6. The Standard Mates Tangent and Concentric-id_ID.srt |
6.22Кб |
| 6. The Standard Mates Tangent and Concentric-it_IT.srt |
5.87Кб |
| 6. The Standard Mates Tangent and Concentric-pl_PL.srt |
6.01Кб |
| 6. The Standard Mates Tangent and Concentric-pt_BR.srt |
6.05Кб |
| 6. The Standard Mates Tangent and Concentric-ro_RO.srt |
6.24Кб |
| 6. The Standard Mates Tangent and Concentric-th_TH.srt |
10.57Кб |
| 6. Using Dimensions (Distances) to Define Your Sketch.mp4 |
145.36Мб |
| 6. Using Dimensions (Distances) to Define Your Sketch-en_US.srt |
12.12Кб |
| 6. Using Dimensions (Distances) to Define Your Sketch-es_ES.srt |
13.25Кб |
| 6. Using Dimensions (Distances) to Define Your Sketch-id_ID.srt |
13.41Кб |
| 6. Using Dimensions (Distances) to Define Your Sketch-it_IT.srt |
13.09Кб |
| 6. Using Dimensions (Distances) to Define Your Sketch-pl_PL.srt |
12.83Кб |
| 6. Using Dimensions (Distances) to Define Your Sketch-pt_BR.srt |
13.20Кб |
| 6. Using Dimensions (Distances) to Define Your Sketch-ro_RO.srt |
13.63Кб |
| 6. Using Dimensions (Distances) to Define Your Sketch-th_TH.srt |
22.55Кб |
| 7. Finding out Existing Mates, Deleting or Modifying them!.mp4 |
71.67Мб |
| 7. Finding out Existing Mates, Deleting or Modifying them!-en_US.srt |
4.91Кб |
| 7. Finding out Existing Mates, Deleting or Modifying them!-es_ES.srt |
4.96Кб |
| 7. Finding out Existing Mates, Deleting or Modifying them!-id_ID.srt |
4.84Кб |
| 7. Finding out Existing Mates, Deleting or Modifying them!-it_IT.srt |
4.80Кб |
| 7. Finding out Existing Mates, Deleting or Modifying them!-pl_PL.srt |
4.84Кб |
| 7. Finding out Existing Mates, Deleting or Modifying them!-pt_BR.srt |
4.82Кб |
| 7. Finding out Existing Mates, Deleting or Modifying them!-ro_RO.srt |
5.10Кб |
| 7. Finding out Existing Mates, Deleting or Modifying them!-th_TH.srt |
8.78Кб |
| 7. That Information Block at the Bottom of the Drawing!.mp4 |
33.35Мб |
| 7. That Information Block at the Bottom of the Drawing!-en_US.srt |
2.10Кб |
| 7. That Information Block at the Bottom of the Drawing!-es_ES.srt |
2.11Кб |
| 7. That Information Block at the Bottom of the Drawing!-id_ID.srt |
2.06Кб |
| 7. That Information Block at the Bottom of the Drawing!-it_IT.srt |
2.11Кб |
| 7. That Information Block at the Bottom of the Drawing!-pl_PL.srt |
2.03Кб |
| 7. That Information Block at the Bottom of the Drawing!-pt_BR.srt |
2.12Кб |
| 7. That Information Block at the Bottom of the Drawing!-ro_RO.srt |
2.06Кб |
| 7. That Information Block at the Bottom of the Drawing!-th_TH.srt |
3.66Кб |
| 7. Yes, we can use Angles too!!.mp4 |
32.22Мб |
| 7. Yes, we can use Angles too!!-en_US.srt |
2.62Кб |
| 7. Yes, we can use Angles too!!-es_ES.srt |
2.72Кб |
| 7. Yes, we can use Angles too!!-id_ID.srt |
2.58Кб |
| 7. Yes, we can use Angles too!!-it_IT.srt |
2.52Кб |
| 7. Yes, we can use Angles too!!-pl_PL.srt |
2.57Кб |
| 7. Yes, we can use Angles too!!-pt_BR.srt |
2.61Кб |
| 7. Yes, we can use Angles too!!-ro_RO.srt |
2.72Кб |
| 7. Yes, we can use Angles too!!-th_TH.srt |
4.39Кб |
| 7 Shortcuts to Speed up Your Workflow.html |
1.55Кб |
| 8. Exporting a Drawing as a PDF or an Image.mp4 |
24.40Мб |
| 8. Exporting a Drawing as a PDF or an Image-en_US.srt |
1.33Кб |
| 8. Exporting a Drawing as a PDF or an Image-es_ES.srt |
1.36Кб |
| 8. Exporting a Drawing as a PDF or an Image-id_ID.srt |
1.48Кб |
| 8. Exporting a Drawing as a PDF or an Image-it_IT.srt |
1.40Кб |
| 8. Exporting a Drawing as a PDF or an Image-pl_PL.srt |
1.45Кб |
| 8. Exporting a Drawing as a PDF or an Image-pt_BR.srt |
1.42Кб |
| 8. Exporting a Drawing as a PDF or an Image-ro_RO.srt |
1.54Кб |
| 8. Exporting a Drawing as a PDF or an Image-th_TH.srt |
2.45Кб |
| 8. External URLs.txt |
243б |
| 8. The Standard Mates Distance and Angle.mp4 |
104.51Мб |
| 8. The Standard Mates Distance and Angle-en_US.srt |
6.70Кб |
| 8. The Standard Mates Distance and Angle-es_ES.srt |
7.05Кб |
| 8. The Standard Mates Distance and Angle-id_ID.srt |
6.97Кб |
| 8. The Standard Mates Distance and Angle-it_IT.srt |
6.79Кб |
| 8. The Standard Mates Distance and Angle-pl_PL.srt |
6.81Кб |
| 8. The Standard Mates Distance and Angle-pt_BR.srt |
6.98Кб |
| 8. The Standard Mates Distance and Angle-ro_RO.srt |
7.10Кб |
| 8. The Standard Mates Distance and Angle-th_TH.srt |
11.20Кб |
| 8. Using Relations to Define your Sketch Part 1 - Between Lines and Points.mp4 |
117.40Мб |
| 8. Using Relations to Define your Sketch Part 1 - Between Lines and Points-en_US.srt |
9.81Кб |
| 8. Using Relations to Define your Sketch Part 1 - Between Lines and Points-es_ES.srt |
10.11Кб |
| 8. Using Relations to Define your Sketch Part 1 - Between Lines and Points-id_ID.srt |
10.61Кб |
| 8. Using Relations to Define your Sketch Part 1 - Between Lines and Points-it_IT.srt |
10.05Кб |
| 8. Using Relations to Define your Sketch Part 1 - Between Lines and Points-pl_PL.srt |
10.15Кб |
| 8. Using Relations to Define your Sketch Part 1 - Between Lines and Points-pt_BR.srt |
10.16Кб |
| 8. Using Relations to Define your Sketch Part 1 - Between Lines and Points-ro_RO.srt |
10.65Кб |
| 8. Using Relations to Define your Sketch Part 1 - Between Lines and Points-th_TH.srt |
17.47Кб |
| 9. The Standard Mate LOCK.mp4 |
44.05Мб |
| 9. The Standard Mate LOCK-en_US.srt |
2.74Кб |
| 9. The Standard Mate LOCK-es_ES.srt |
2.83Кб |
| 9. The Standard Mate LOCK-id_ID.srt |
2.85Кб |
| 9. The Standard Mate LOCK-it_IT.srt |
2.78Кб |
| 9. The Standard Mate LOCK-pl_PL.srt |
2.81Кб |
| 9. The Standard Mate LOCK-pt_BR.srt |
2.82Кб |
| 9. The Standard Mate LOCK-ro_RO.srt |
2.90Кб |
| 9. The Standard Mate LOCK-th_TH.srt |
4.92Кб |
| 9. Using Relations to Define Your Sketches Part 2 -Between Circles, Ellipses, Lines.mp4 |
164.28Мб |
| 9. Using Relations to Define Your Sketches Part 2 -Between Circles, Ellipses, Lines-en_US.srt |
12.33Кб |
| 9. Using Relations to Define Your Sketches Part 2 -Between Circles, Ellipses, Lines-es_ES.srt |
12.73Кб |
| 9. Using Relations to Define Your Sketches Part 2 -Between Circles, Ellipses, Lines-id_ID.srt |
12.74Кб |
| 9. Using Relations to Define Your Sketches Part 2 -Between Circles, Ellipses, Lines-it_IT.srt |
12.45Кб |
| 9. Using Relations to Define Your Sketches Part 2 -Between Circles, Ellipses, Lines-pl_PL.srt |
12.26Кб |
| 9. Using Relations to Define Your Sketches Part 2 -Between Circles, Ellipses, Lines-pt_BR.srt |
12.59Кб |
| 9. Using Relations to Define Your Sketches Part 2 -Between Circles, Ellipses, Lines-ro_RO.srt |
13.13Кб |
| 9. Using Relations to Define Your Sketches Part 2 -Between Circles, Ellipses, Lines-th_TH.srt |
21.86Кб |
| Additional-Sketching-Commands.PDF |
31.79Кб |
| Assembly_Coinc_Parallel_Prepenp_2013.SLDASM |
119.50Кб |
| Ball.JPG |
971.57Кб |
| Base_2013.SLDPRT |
92.00Кб |
| Before taking SOLIDWORKS Certification Test _ Sample Test.html |
826б |
| Big Post_2013.SLDPRT |
117.00Кб |
| Block_circles_2013.SLDPRT |
117.00Кб |
| Block_Coinc_parallel_prepend_2013.SLDPRT |
132.50Кб |
| BONUS Lecture.html |
811б |
| Bonus Resources.txt |
357б |
| Box_Pivot_2013.SLDPRT |
186.50Кб |
| Chamfers.SLDPRT |
181.50Кб |
| circles_2013.SLDPRT |
132.50Кб |
| Congratulations!! You are done! Tell us something now.html |
1.61Кб |
| Cube_OAK_2013.SLDPRT |
574.50Кб |
| Design-Priority-Centered.PNG |
176.45Кб |
| Drawing-Competencies.pdf |
404.46Кб |
| Drawing Demo_1_Dim ON.SLDDRW |
353.00Кб |
| Drawing Demo_1_Info Table.SLDDRW |
682.00Кб |
| Drawing Demo_1_Orthographic Views on.SLDDRW |
277.00Кб |
| Drawing Demo_1_Scale on on.SLDDRW |
284.50Кб |
| Drawing Demo_1.SLDPRT |
208.00Кб |
| Editing and Deleting Features.SLDPRT |
181.50Кб |
| EXERCISE Practice, Practice, Practice - Assemblies.html |
1.05Кб |
| EXERCISES on Basic Features..... Practice, Practice, Practice.html |
563б |
| EXERCISES on Materials and Mass Properties... Practice, Practice, Practice.html |
2.39Кб |
| EXERCISES on more Complex Features.html |
596б |
| Exploring the Benefits for SOLIDWORKS Certifications as a User!.html |
601б |
| Extrude-Cut-and-Fillet-Updated.PNG |
859.72Кб |
| Get Bonus Downloads Here.url |
183б |
| Going 3D_2013.SLDPRT |
184.00Кб |
| Going-3D-2015.PNG |
45.88Кб |
| Handle_2013.SLDPRT |
174.00Кб |
| Interface and Navigation model_2013.SLDPRT |
131.50Кб |
| Join Our SOLIDWORKS Community.html |
960б |
| Know Active Relations_2013.SLDPRT |
122.00Кб |
| Lab_ring_2015.SLDPRT |
342.17Кб |
| Lab Ring Drawing.PNG |
1.47Мб |
| Link_2013.SLDPRT |
185.50Кб |
| Loft.JPG |
1.51Мб |
| Post Handle_2013.SLDPRT |
141.00Кб |
| Practice_Drawing.JPG |
1.50Мб |
| Practice-Extrude-And-Chamfer-Drawing.PNG |
228.94Кб |
| Practice-Sweep-Refrence-Planes-Revolve.JPG |
1.56Мб |
| rectangle_1_2013.SLDPRT |
91.50Кб |
| Refrence-Geometry-Planes-Drawing.JPG |
1.16Мб |
| Relations-Curves.PDF |
38.13Кб |
| Revolve-And-Revolve-Cut-.JPG |
1.09Мб |
| Section Conclusion Basic Interface and Navigation.html |
810б |
| Section Conclusion Let's Explore Material and Mass Properties.html |
877б |
| Section Conclusion Let's Start Applying Basic Features!.html |
1021б |
| Section Conclusion Let's Start Applying more Complex Features.html |
1.05Кб |
| Section Conclusion Let's Start doing 2D Drawings!.html |
1.29Кб |
| Section Conclusion Let's start doing Assemblies.html |
1.13Кб |
| Section Conclusion Let us Start Sketching.html |
1.16Кб |
| Sketching-EX.pdf |
414.56Кб |
| Small Post_2013.SLDPRT |
112.50Кб |
| Square_2013.SLDPRT |
151.50Кб |
| Sweep-Boss-And-Cut.JPG |
1.17Мб |
| Switch your SOLIDWORKS interface to Dark Mode.html |
1.32Кб |
| Taking SOLIDWORKS Certification Test.html |
729б |
| The importance of 2D Engineering Drawings.html |
1.44Кб |
| The SOLIDWORKS Version(s).html |
1.27Кб |
| Traingle_2013.SLDPRT |
85.50Кб |
| What are Features! Where do they Fall in Modelling!.html |
416б |
| What is SOLIDWORKS!.html |
744б |
| Wing_2013.SLDPRT |
91.50Кб |