|
Обратите внимание, что наш сайт не размещает какие-либо файлы из списка. Вы не можете скачать
эти файлы или скачать torrent-файл.
|
| [FreeCoursesOnline.Me].url |
133б |
| [FreeTutorials.Eu].url |
129б |
| [FTU Forum].url |
1.34Кб |
| 1. Before taking SOLIDWORKS Certification Test _ Sample Test.html |
841б |
| 1. SustainabilityEdu Initiative.html |
1.22Кб |
| 1. What is in this section! Basic SOLIDWORKS Interface and Navigation.mp4 |
19.87Мб |
| 1. What is in this section! Basic SOLIDWORKS Interface and Navigation.srt |
985б |
| 1. What is in This Section! Lets Start Applying Basic Features!.mp4 |
21.47Мб |
| 1. What is in This Section! Lets Start Applying Basic Features!.srt |
940б |
| 1. What is in this Section! Lets Start Sketching.mp4 |
18.85Мб |
| 1. What is in this Section! Lets Start Sketching.srt |
905б |
| 1. What is this Course all about!!.mp4 |
34.92Мб |
| 1. What is this Course all about!!.srt |
2.18Кб |
| 1. What is this Section! Let's Start Applying more Complex Features.mp4 |
17.23Мб |
| 1. What is this Section! Let's Start Applying more Complex Features.srt |
850б |
| 1. What is this Section Let's Explore Material and Mass Properties.mp4 |
15.49Мб |
| 1. What is this Section Let's Explore Material and Mass Properties.srt |
736б |
| 1. What is this Section Let's Start doing 2D Drawings.mp4 |
21.00Мб |
| 1. What is this Section Let's Start doing 2D Drawings.srt |
1.07Кб |
| 1. What is this Section Let's start doing Assemblies.mp4 |
23.94Мб |
| 1. What is this Section Let's start doing Assemblies.srt |
1.05Кб |
| 10.1 Coord System_Student Package.zip.zip |
1.62Мб |
| 10. Reference Geometries Coordinate System.mp4 |
54.28Мб |
| 10. Reference Geometries Coordinate System.srt |
4.04Кб |
| 10. Section Conclusion Let's Start doing 2D Drawings!.html |
1.29Кб |
| 10. SOLIDWORKS Applying Relations Automatically!! How does that work!.mp4 |
16.54Мб |
| 10. SOLIDWORKS Applying Relations Automatically!! How does that work!.srt |
4.13Кб |
| 11.1 All parts used in the assembly _ SW 2013.html |
134б |
| 11.1 The sketch we are using in this lecture_SOLIDWORKS 2013.html |
145б |
| 11. Knowing and Deleting Active Relations.mp4 |
10.40Мб |
| 11. Knowing and Deleting Active Relations.srt |
2.64Кб |
| 11. PRACTICE!! Let's Assemble something using Standard Mates.mp4 |
48.91Мб |
| 11. PRACTICE!! Let's Assemble something using Standard Mates.srt |
8.00Кб |
| 12.1 Assemblies Exercise 1.html |
134б |
| 12.2 Assemblies Exercise _ 3.html |
134б |
| 12.3 Assemblies Exercise 2.html |
134б |
| 12. Additional Lines Construction Lines and Center Lines.mp4 |
12.61Мб |
| 12. Additional Lines Construction Lines and Center Lines.srt |
3.03Кб |
| 12. EXERCISE Practice, Practice, Practice - Assemblies.html |
1.10Кб |
| 13. More Sketch Commands Mirror, Offset, Patterns and Trim.mp4 |
32.02Мб |
| 13. More Sketch Commands Mirror, Offset, Patterns and Trim.srt |
7.88Кб |
| 13. Section Conclusion Let's start doing Assemblies.html |
1.12Кб |
| 14. EXERCISES on Sketching.... Practice, Practice, Practice..pdf |
653.63Кб |
| 15.1 The Sketch we used during this lecture.html |
130б |
| 15.2 Going 3D_2015.PNG.PNG |
45.88Кб |
| 15. Teaser to the next Section GOING 3D.mp4 |
5.65Мб |
| 15. Teaser to the next Section GOING 3D.srt |
1.07Кб |
| 16. Section Conclusion Let us Start Sketching.html |
1.15Кб |
| 2.1 Ball.JPG |
971.57Кб |
| 2.1 Block_Circles_2013.html |
133б |
| 2.1 CSWA Sample Exam.pdf |
2.61Мб |
| 2.1 Square_2013.html |
126б |
| 2.1 The Model Used in the lecture _ SW 2013.html |
131б |
| 2.2 Block_Circles_2013.html |
133б |
| 2.2 Revolve And Revolve Cut!.JPG |
1.09Мб |
| 2.2 Triangle_2013.html |
128б |
| 2.3 Square_2013.html |
126б |
| 2.3 Triangle_2013.html |
128б |
| 2. How to Study this course! In a Udemy-Technical-Sense !!.mp4 |
3.87Мб |
| 2. How to Study this course! In a Udemy-Technical-Sense !!.srt |
125б |
| 2. Opening a Drawing File.mp4 |
7.65Мб |
| 2. Opening a Drawing File.srt |
3.83Кб |
| 2. Opening an Assembly File.mp4 |
20.69Мб |
| 2. Opening an Assembly File.srt |
3.89Кб |
| 2. Select a Plane to Sketch on.mp4 |
7.55Мб |
| 2. Select a Plane to Sketch on.srt |
2.42Кб |
| 2. Selecting Materials for Your Parts.mp4 |
16.80Мб |
| 2. Selecting Materials for Your Parts.srt |
2.98Кб |
| 2. Starting a New Part.mp4 |
2.25Мб |
| 2. Starting a New Part.srt |
788б |
| 2. Taking SOLIDWORKS Certification Test.html |
390б |
| 2. The Complete Guide to Climate Change Course Trailer.mp4 |
12.00Мб |
| 2. The Complete Guide to Climate Change Course Trailer.srt |
574б |
| 2. The Features Revolved Boss and Revolved Cut!.mp4 |
52.20Мб |
| 2. The Features Revolved Boss and Revolved Cut!.srt |
12.14Кб |
| 2. What are Features! Where do they Fall in Modelling!.html |
501б |
| 3.1 Extrude Cut And Fillet.PNG |
346.15Кб |
| 3.1 Sweep Boss And Cut.JPG |
1.17Мб |
| 3.1 The 3D Model we are using in the lecture_ SOLIDWORKS 2013.html |
156б |
| 3.1 The Oak cube we used in this lecture_SOLIDWORKS 2013.html |
128б |
| 3.1 Triangle_2013.html |
128б |
| 3.2 Rectangle_2013.html |
131б |
| 3. Adjusting Measurement Units' System in a Drawing File.mp4 |
1.89Мб |
| 3. Adjusting Measurement Units' System in a Drawing File.srt |
1.42Кб |
| 3. Congratulations! We are done with this course!.mp4 |
21.63Мб |
| 3. Congratulations! We are done with this course!.srt |
986б |
| 3. Know about the Command Bar, Canvas and Design Tree.mp4 |
7.06Мб |
| 3. Know about the Command Bar, Canvas and Design Tree.srt |
1.48Кб |
| 3. Our First Features Extrude Boss, Cut Extrude, and Fillet.mp4 |
44.27Мб |
| 3. Our First Features Extrude Boss, Cut Extrude, and Fillet.srt |
10.17Кб |
| 3. The Features Swept Boss and Swept Cut.mp4 |
36.78Мб |
| 3. The Features Swept Boss and Swept Cut.srt |
7.50Кб |
| 3. Types of Mates in SOLIDWORKS Standard, Advanced and Mechanical.mp4 |
10.50Мб |
| 3. Types of Mates in SOLIDWORKS Standard, Advanced and Mechanical.srt |
1.87Кб |
| 3. Viewing Mass Properties.mp4 |
15.19Мб |
| 3. Viewing Mass Properties.srt |
2.94Кб |
| 3. WATCH OUT!! Always Link your Sketches to the Origin.mp4 |
2.80Мб |
| 3. WATCH OUT!! Always Link your Sketches to the Origin.srt |
748б |
| 3. What is SOLIDWORKS!.html |
734б |
| 4.1 Model for the exercise_ SW 2013.html |
144б |
| 4.1 Rectangle_2013.html |
131б |
| 4.1 Refrence Geometry Planes Drawing.JPG |
1.16Мб |
| 4.1 The model used in the lecture _ SW 2013.html |
131б |
| 4.1 The model we used in the lecture!.html |
142б |
| 4.2 Triangle_2013.html |
128б |
| 4. Adjusting the Document's Measurement Units.mp4 |
4.83Мб |
| 4. Adjusting the Document's Measurement Units.srt |
1.13Кб |
| 4. A Point in Adding Parts _ Base Fixed Part.mp4 |
10.24Мб |
| 4. A Point in Adding Parts _ Base Fixed Part.srt |
1.94Кб |
| 4. Congratulations!! You are done! Tell us something now....html |
1.42Кб |
| 4. Creating Standard Orthographic Views from a Part.mp4 |
7.44Мб |
| 4. Creating Standard Orthographic Views from a Part.srt |
3.44Кб |
| 4. EXERCISES on Materials and Mass Properties... Practice, Practice, Practice.html |
2.37Кб |
| 4. Exploring the Benefits for SOLIDWORKS Certifications as a User!.html |
663б |
| 4. Let us Edit and Delete Features..mp4 |
25.77Мб |
| 4. Let us Edit and Delete Features..srt |
5.30Кб |
| 4. Reference Geometries Making new Planes other than Base Planes and faces!.mp4 |
65.90Мб |
| 4. Reference Geometries Making new Planes other than Base Planes and faces!.srt |
12.75Кб |
| 4. Sketching Basic Shapes Part 1 - Rectangles and Lines.mp4 |
17.57Мб |
| 4. Sketching Basic Shapes Part 1 - Rectangles and Lines.srt |
4.68Кб |
| 5.1 Loft.JPG |
1.51Мб |
| 5.1 The drawing used in the lecture _ SW 2013.html |
157б |
| 5.1 The Model we are using at the lecture_ in SOLIDWORKS 2013.html |
156б |
| 5.1 The model we used in the lecture!.html |
142б |
| 5.1 Triangle_2013.html |
128б |
| 5.2 Block_Coincident _parallel _Perpendicular.html |
148б |
| 5.2 The Model Used in the lecture _ SW 2013.html |
131б |
| 5.3 Rectangle_2013.html |
131б |
| 5.4 Square_2013.html |
126б |
| 5. BONUS Lecture Go Pro + Refer a Friend.html |
1.84Кб |
| 5. How to Change the Drawing Scale.mp4 |
4.24Мб |
| 5. How to Change the Drawing Scale.srt |
2.23Кб |
| 5. Let us do Chamfers now.mp4 |
31.05Мб |
| 5. Let us do Chamfers now.srt |
6.51Кб |
| 5. Section Conclusion Let's Explore Material and Mass Properties..html |
877б |
| 5. Sketching Basic Shapes Part 2 - Circles, Arcs and Ellipses.mp4 |
14.80Мб |
| 5. Sketching Basic Shapes Part 2 - Circles, Arcs and Ellipses.srt |
5.71Кб |
| 5. The Features Lofted Boss and Lofted Cut.mp4 |
70.75Мб |
| 5. The Features Lofted Boss and Lofted Cut.srt |
13.18Кб |
| 5. The SOLIDWORKS Version(s) we are using for this course!! And other version info!.html |
546б |
| 5. The Standard Mates Coincident, Parallel, and Perpendicular.mp4 |
41.46Мб |
| 5. The Standard Mates Coincident, Parallel, and Perpendicular.srt |
8.06Кб |
| 5. Utilizing the Mouse for More Efficient Models Control and Creation.mp4 |
8.18Мб |
| 5. Utilizing the Mouse for More Efficient Models Control and Creation.srt |
1.66Кб |
| 6.1 Circle _ 2013.html |
127б |
| 6.1 Practice Extrude And Chamfer Drawing.PNG |
228.94Кб |
| 6.1 Practice Sweep Refrence Planes Revolve.JPG |
1.56Мб |
| 6.1 The model used in the lecture _ SW 2013.html |
131б |
| 6.2 Block_ Circles_2013.html |
133б |
| 6.2 The drawing used in the lecture _ SW 2013.html |
147б |
| 6. Communicate your Drawings Dimensions, Holes, Centerlines and Display Style.mp4 |
18.36Мб |
| 6. Communicate your Drawings Dimensions, Holes, Centerlines and Display Style.srt |
8.28Кб |
| 6. Let us Practice our First Features!.mp4 |
42.46Мб |
| 6. Let us Practice our First Features!.srt |
9.44Кб |
| 6. PRACTICE!! Let's Model Something that uses some of those Complex Features!.mp4 |
80.50Мб |
| 6. PRACTICE!! Let's Model Something that uses some of those Complex Features!.srt |
14.73Кб |
| 6. Section Conclusion Basic Interface and Navigation.html |
810б |
| 6. The Standard Mates Tangent and Concentric.mp4 |
32.33Мб |
| 6. The Standard Mates Tangent and Concentric.srt |
5.96Кб |
| 6. Using Dimensions (Distances) to Define Your Sketch.mp4 |
50.85Мб |
| 6. Using Dimensions (Distances) to Define Your Sketch.srt |
12.94Кб |
| 7.1 Complex Features_EX_Inches.PDF.PDF |
140.57Кб |
| 7.1 Complex Features_EX_MM.PDF.PDF |
128.02Кб |
| 7.1 Design Priority Centered.PNG |
176.45Кб |
| 7.1 The model used in the lecture _ SW 2013.html |
131б |
| 7.1 Triangle _ 2013.html |
128б |
| 7.2 Block _ Concentric , Parallel , Perpendicular _ 2013.html |
148б |
| 7.2 Complex Features_EX_Inches.PDF.PDF |
140.57Кб |
| 7.2 Complex Features_EX_MM.PDF.PDF |
128.02Кб |
| 7.2 The drawing used in the lecture _ SW 2013.html |
140б |
| 7.3 Rectangle _ 2013.html |
131б |
| 7.4 Square _ 2013.html |
126б |
| 7.5 Assembly Concentric, Parallel , Perpendicular.html |
151б |
| 7. Design Priorities_ A point in Design Intent.mp4 |
32.04Мб |
| 7. Design Priorities_ A point in Design Intent.srt |
7.06Кб |
| 7. EXERCISES on more Complex Features..html |
596б |
| 7. Finding out Existing Mates, Deleting or Modifying them!.mp4 |
25.24Мб |
| 7. Finding out Existing Mates, Deleting or Modifying them!.srt |
4.73Кб |
| 7. That Information Block at the Bottom of the Drawing!.mp4 |
5.42Мб |
| 7. That Information Block at the Bottom of the Drawing!.srt |
2.06Кб |
| 7. Yes, we can use Angles too!!.mp4 |
10.97Мб |
| 7. Yes, we can use Angles too!!.srt |
2.62Кб |
| 8.1 Base _ 2013.html |
124б |
| 8.1 Basic Features_EX_Inches_Update 1.PDF.PDF |
95.44Кб |
| 8.1 Basic Features EX MM.PDF |
163.17Кб |
| 8.1 The Drawing used in the Lecture _ SW 2013.html |
144б |
| 8.2 Basic Features_EX_Inches_Update 1.PDF.PDF |
95.44Кб |
| 8.2 Basic Features EX MM.PDF |
163.17Кб |
| 8.2 The model used in the lecture _ SW 2013.html |
131б |
| 8.2 Wing _ 2013.html |
124б |
| 8. EXERCISES on Basic Features..... Practice, Practice, Practice.html |
557б |
| 8. Exporting a Drawing as a PDF or an Image.mp4 |
3.97Мб |
| 8. Exporting a Drawing as a PDF or an Image.srt |
1.34Кб |
| 8. Section Conclusion Let's Start Applying more Complex Features.html |
1.04Кб |
| 8. The Standard Mates Distance and Angle.mp4 |
34.06Мб |
| 8. The Standard Mates Distance and Angle.srt |
6.77Кб |
| 8. Using Relations to Define your Sketch Part 1 - Between Lines and Points.mp4 |
40.23Мб |
| 8. Using Relations to Define your Sketch Part 1 - Between Lines and Points.srt |
10.21Кб |
| 9.1 Base _ 2013.html |
124б |
| 9.1 Relations Curves.PDF |
38.13Кб |
| 9.2 Wing _ 2013.html |
124б |
| 9. Additional Drawing Competencies Know what is meant with drawing annotations.pdf |
404.46Кб |
| 9. Section Conclusion Let's Start Applying Basic Features!.html |
1011б |
| 9. The Standard Mate LOCK.mp4 |
14.67Мб |
| 9. The Standard Mate LOCK.srt |
2.74Кб |
| 9. Using Relations to Define Your Sketches Part 2 -Between Circles, Ellipses, Lines.mp4 |
57.59Мб |
| 9. Using Relations to Define Your Sketches Part 2 -Between Circles, Ellipses, Lines.srt |
12.69Кб |
| FTUApps.com website coming soon.txt |
94б |
| How you can help Team-FTU.txt |
241б |